ATEN US3344I 4x4 USB 3.2 Gen 1 industrial hub switch user manual: hardware setup, DIP switch settings, port selection, and specifications.
This is the user manual for the ATEN US3344I, a 4x4 USB 3.2 Gen 1 Industrial Hub Switch. It explains installation, configuration and operation of the unit, starting with an introduction to its purpose, features and panel components, followed by the hardware setup steps needed to install it safely.
The manual then covers the unit's DIP switch options, firmware upgrade, baud rate, and port selection including RS-422 / RS-485 port selection over the terminal block connection. An appendix adds safety instructions, ATEN technical support contacts, product specifications and the limited warranty terms.
| Computer Connections | 4 |
|---|---|
| Computer Connectors | 4 x USB Type B Female (Blue) |
| Device Connectors | 4 x USB Type B Female (Blue) |
| Serial Connector | 1 x 5-pin Terminal Plug (Green) |
| Power Connector | 1 x 2-pin 9-24V Terminal Plug (Green) |
| Optional Power | 1 x 12V DC Jack Female (Black) |
| Port Selection | Remote port selector / serial command |
| Operating Temperature | 0 - 50 ºC |
| Storage Temperature | -20 - 60 ºC |
| Humidity | 0 - 80% RH, Non-Condensing |
| Housing | Metal |
| Weight | 1.04 kg (2.29 lb) |
| Dimensions (L x W x H) | 20.00 x 8.00 x 2.50 cm (7.87 x 3.15 x 0.98 in) |
The package contains the US3344I 4x4 USB 3.2 Gen 1 Industrial Hub Switch, two USB 3.1 Gen 1 Type-B to Type-A cables (1.2M and 1.8M), a remote port selector, a mounting kit, a terminal block adapter set, and user instructions.
Ports can be selected with the remote port selector or by serial command; the manual also covers RS-422 / RS-485 port selection.
The unit operates between 0 and 50 ºC, and can be stored between -20 and 60 ºC.
Yes, it describes mounting, including rack mounting and wall mounting.