3M Three-Way Catalytic Converter Maintenance Agent SOPM-41001 Standard Application Procedure Guide

3M guide for the standard application procedure of its three-way catalytic converter maintenance agent, covering equipment setup, safety notes, and filter care.


3M Three-Way Catalytic Converter Maintenance Agent SOPM-41001 Standard Application Procedure Guide - cover page
Brand
3M
Category
Vehicle maintenance
Document type
User Manual
Language
Chinese
Pages
2
File format
PDF
File size
503 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
958BCE5D41EBDB1C822A652D4A677680

About this manual

This 3M document (file number SOPM-41001) is a standard application procedure guide for 3M Three-Way Catalytic Converter Maintenance Agent. It lists the work sequence from vehicle inspection and fuel-line checks through cutting fuel-pump power, opening the fuel tank cap, injecting the fluid into the equipment, connecting and regulating the air supply, fitting the correct adapter, connecting the equipment to the fuel circuit, and idling until the engine stops; after cleaning, the equipment is removed in reverse order with a specified venting procedure.

The guide gives safety notes: work in a well-ventilated area away from ignition sources, use only trained personnel, wear personal protective equipment, clear vehicle faults before operation, use only on four-stroke reciprocating gasoline engines, do not use with other carbon-deposit cleaning products, follow the equipment supplier's instructions, keep the engine idling during cleaning, and adjust pressure according to OEM data. It also covers equipment selection and care: an outlet filter with openings smaller than 100 micron (150 mesh or higher), stainless steel filters are recommended, copper powder metallurgy filters are not, and equipment and filter maintenance intervals and replacement conditions are stated. This manual is written in Chinese.

What's inside

  • 产品标准施工流程
  • 检查车辆
  • 切断油泵供电
  • 将药液注入设备
  • 连接气源并调压
  • 将设备接入油路
  • 清洗后拆卸与排气
  • 注意事项
  • 设备的选用要领
  • 设备的使用及清洗保养

Specifications

Applicable engine typeFour-stroke reciprocating gasoline engine
Outlet filter meshSmaller than 100 micron (150 mesh or higher)
Recommended filter materialStainless steel
Equipment cleaning agent3M 化清剂 (PN08896)
Equipment maintenance frequencyAt least 2-3 times per week
Filter inspection frequencyAt least once per week

Frequently asked questions

Which engines can 3M Three-Way Catalytic Converter Maintenance Agent be used on?

It can only be used on four-stroke reciprocating gasoline engines.

What engine speed should be maintained during cleaning?

The engine must be kept idling during cleaning.

Which filter material is recommended for the equipment?

A stainless steel filter is recommended.

How often should the equipment be maintained?

The equipment should be maintained regularly, at least two to three times per week.

Download PDF (503 KB)

More 3M Manuals


View all 3M manuals →