The Dell PowerConnect W-Series ArubaOS 6.1 Command Line Interface Reference Guide introduces the Dell PowerConnect W-Series ArubaOS 6.1 CLI.
The Dell PowerConnect W-Series ArubaOS 6.1 Command Line Interface Reference Guide describes the ArubaOS command line interface used to configure and manage controllers. The CLI is accessible from a local console connected to the serial port on the controllers or through a Telnet or Secure Shell (SSH) session from a remote management console or workstation.
The opening sections list the commands added in ArubaOS 6.1, such as clear wms wired-mac, controller-ipv6, ipv6 route, netdestination6 and the NTP authentication commands, and the commands modified in this release, including IPv6 support in interface, neighbor and routing commands, certificate and PKI options, IPsec and IKEv2 parameters, and new firewall and IDS parameters. The guide is copyright 2011 Aruba Networks, Inc. and carries document number 0510846-01.
| CLI access methods | Local console on the controller serial port, or a Telnet or SSH session |
|---|---|
| Telnet access default state | Disabled by default |
| Software version | ArubaOS 6.1 |
| Document number | 0510846-01 |
From a local console connected to the serial port on the controllers, or through a Telnet or Secure Shell (SSH) session from a remote management console or workstation.
No. Telnet access is disabled by default; to enable it, enter the telnet cli command from a serial connection or an SSH session.
The guide lists additions including clear wms wired-mac, controller-ipv6, ipv6 route, netdestination6 and the NTP authentication commands.
The document identifies modified commands such as netdestination6, netexthdr, ntp authenticate, show ipv6 route, tracepath and several IPv6-related show commands.