Dell OptiPlex 990 Small Form Factor Service Manual
This service manual covers removal and installation procedures for the Dell OptiPlex 990 Small Form Factor computer, including the cover, front bezel, expansion card, optical drive, hard drive, memory, intrusion switch, chassis, heat sink, coin-cell battery, power-switch cable, system fan, I/O panel, power supply, system board, drive cage, and fan shroud. It also includes system setup information, boot menu options, diagnostic LEDs, beep codes, error messages, and technical specifications.
The document is the Romanian edition, revision A00 from 2011-06, with model regulation D03S and type regulation D03S001. It advises that many repairs should be performed only by a certified service technician and includes safety guidance for working inside the computer.
| Small Form Factor height | 29.00 cm (11.42 in) |
|---|---|
| Small Form Factor width | 9.26 cm (3.65 in) |
| Small Form Factor depth | 31.20 cm (12.28 in) |
| Small Form Factor weight | 5.70 kg (12.57 lb) |
| Operating temperature range | 10 to 35°C (50 to 95°F) |
| Storage temperature range | –40 to 65°C (–40 to 149°F) |
| Maximum operating relative humidity | 20% to 80% (non-condensing) |
| Maximum operating vibration | 0.26 GRMS |
| Maximum operating shock | 40 G |
| Operating altitude | –15.2 to 3048 m (–50 to 10,000 ft) |
| Model regulation | D03S |
| Type regulation | D03S001 |
Read the safety information that ships with the computer, disconnect power and network cables, and ground yourself to prevent electrostatic discharge before touching internal components.
The manual covers the cover, front bezel, expansion card, optical drive, hard drive, memory, intrusion switch, chassis, heat sink and processor, coin-cell battery, power-switch cable, system fan, I/O panel, power supply, system board, drive cage, and fan shroud.
Save and close open files, exit all programs, shut down the operating system, and verify that the computer and attached devices are off.
Visit support.dell.com, choose your country or region, select Contact us, and choose the appropriate technical support or service option.