The Dell Battery Slice Setup Guide describes how to install and use the Dell Battery Slice.
This guide explains how to set up a Dell Battery Slice with a compatible Dell computer, including docking, undocking, charging, and power-management settings before undocking.
It also lists battery-slice specifications and power-status LED codes for supported, temporary-failure, fatal-failure, full-charge, and charge-mode states.
| Type | 9-cell lithium-ion cell |
|---|---|
| Height | 22.60 mm (0.89 inch) |
| Width | 94.89 mm (3.74 inches) |
| Depth | 275.38 mm (10.84 inches) |
| Weight | 605.00 g (1.33 lb) |
| Amp-hour capacity | 3.0 Ah per cell |
| Watt-hour capacity | 97 Wh |
| Operating temperature | 0° C to 60° C (32° F to 140° F) |
| Non-operating temperature | -20° C to 60° C (-4° F to 140° F) |
| Docking connector | 144-pin connector |
Turn the computer over, lower the battery slice until it clicks into place, then flip the computer and power it on.
You can recharge it independently with the AC adapter that shipped with your computer, and a docked computer also charges it.
Disconnect all cables connected to the computer, flip the computer on its back, then press the release lever and lift the battery slice.
The battery is in charge mode with the AC adapter present.