The FX-301 is a NPN output fiber amplifier with the following features: 1. Uses an infrared LED as the light source, with a wavelength of 660nm. 2. The fiber diameter is 0.2mm and the length is 2m. 3. The output power is 10mW. 4. The working voltage is 12-24Vdc. 5. The power consumption is 40mA. 6. The response time is 65us. 7. The protection level is IP67.
This is the instructions manual for the KEYENCE FX-300 Series fiber amplifier, covering the NPN output FX-301 and the PNP output FX-301P. The four-page sheet gives the specification table (supply voltage, output ratings, response times, ambient conditions, materials and weight), then explains how to mount and remove the amplifier on a 35 mm DIN rail, how to insert an optical fiber cable, and how to connect the quick-connect cable used on the FX-301(P).
The manual also describes cascading of up to 16 amplifiers, the NPN and PNP I/O circuit diagrams with the connector terminal arrangement, a parts description, the operation procedure, and a list of precautions such as grounding, avoiding inductive noise and not using the sensor in explosive or wet environments. Connector master cables CN-73-C and sub cables CN-71-C are listed, but the manual notes that the connecting cable is not supplied as an accessory.
| Supply voltage | 12 to 24 Vdc ±10%, ripple P-P 10% or less |
|---|---|
| Current consumption | Normal operation: 40 mA or less @ 24 Vdc; ECO mode: 25 mA or less @ 24 Vdc |
| Output type | NPN transistor collector-open (FX-301); PNP transistor collector-open (FX-301P) |
| Max. switching current | 100 mA (50 mA when five or more FX-301(P) amplifiers are cascaded) |
| Applied voltage | 30 Vdc or less (between output and 0V) |
| Residual voltage | 1.5 V or less (at 100 mA consumption) |
| Response time | H-SP: 65 ms or less; FAST: 150 ms or less; S-D: 250 ms or less; STD: 250 ms or less; LONG: 2 ms or less |
| Display | 4-digit red LED display |
| Timer function | ON-delay / OFF-delay / ONE-SHOT, time approx. 0.5 to 9999 ms |
| Interference prevention | Up to 4 fiber cables assembled adjacent (H-SP mode: 2 fibers) |
| Ambient temperature | -10 to +55°C (4 to 7 cascaded units: -10 to +50°C; 8 to 16 cascaded amplifiers: -10 to +45°C) |
| Ambient humidity | 35 to 85% RH |
| Emitter element | Red LED (modulated) |
| Material | Casing: ABS; transparent cover: polycarbonate; switch button: acrylic; jog switch: ABS |
| Weight | Approx. 20 g |
| Max. cascade | Up to 15 amplifiers added (total of 16 cascaded amplifiers) |
It operates on 12 to 24 Vdc ±10% with a ripple of P-P 10% or less.
Up to 15 amplifiers can be added, for a total of 16 cascaded amplifiers.
The range is -10 to +55°C; with 4 to 7 cascaded units it is -10 to +50°C and with 8 to 16 cascaded amplifiers -10 to +45°C.
A quick-connect cable must be used, for example the master cable CN-73-C1 (1 m cable); the connecting cable is not supplied as an accessory.