QSC SR-18 Cinema Surround Loudspeaker User Manual

SR-18 Cinema Surround Loudspeaker is a high power handling, excellent sensitivity, and extended bass response in a very compact enclosure.


QSC SR-18 Cinema Surround Loudspeaker User Manual - cover page
Brand
QSC
Category
Home Speakers
Document type
User Manual
Language
English
Pages
10
File format
PDF
File size
976 KB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
620A7062B2569BFDD4FEC00EF623A43D

About this manual

The SR-18 is a compact cinema surround loudspeaker from QSC. It uses a high-power long-throw 8-inch (203 mm) low-frequency transducer and a 1-inch (25 mm) titanium diaphragm compression driver on a constant-directivity horn. QSC says the crossover is voiced for flat low-frequency response when the speaker is used in an array on a theater wall, using Array Optimized Tuning (AOT). The painted plywood enclosure has a built-in 15° baffle tilt; the loudspeaker half of the Quick Mount bracket is pre-installed, the wall bracket is purchased separately, and a U-bracket is also available.

The manual covers barrier-strip connections: amplifier output goes to the INPUT terminals, and the OUTPUT terminals are wired in parallel so multiple SR-18 enclosures can be connected in parallel. It includes warnings that the enclosure must not be suspended, flown, or rigged by any other method and that QSC-specified brackets and hardware should be used. Specifications include a 100-watt maximum input power rating, 8-ohm impedance, and a three-year limited warranty for the USA.

What's inside

  • Introduction
  • SR-18 Specifications
  • Connections
  • Warnings and Important Notes
  • Warranty
  • Disclaimer

Specifications

Frequency Response52 - 20,000 Hertz (-6 dB, 4 pi); 48 - 20,000 Hertz usable range (-10 dB, 4 pi)
Nominal Coverage95° horizontal x 85° vertical (average 1,000 to 10,000 Hertz)
Impedance8 ohms
Maximum Input Power100 watts (2 hours IEC 268, 50 - 20,000 Hertz)
Sensitivity91.0 dB (2.83V, 1m)
Crossover Frequency1,900 Hertz
ConnectorsFour terminal barrier strip; outputs in parallel with inputs
Transducers8” (203mm) woofer; 1” (25mm) Ti compression driver on CD horn
EnclosurePainted plywood, 15° baffle
Size20.54” H x 12.00” W x 11.75” D (521.6mm x 304.8mm x 298.5mm)
Weight24 lbs. as hung (11 kg.)
Optional Quick Mount BracketsQM-SW (0° tilt) or QM-BW (8° tilt)

Frequently asked questions

What is the maximum input power of the QSC SR-18?

It is rated for 100 watts maximum input power, tested for 2 hours per IEC 268 from 50 to 20,000 Hertz.

Can the SR-18 be suspended or flown?

No. The manual states: Do not suspend, fly, or rig this enclosure. Use the specified Quick Mount or U-bracket for wall mounting.

How are multiple SR-18 loudspeakers connected in parallel?

The SR-18 OUTPUT terminals are connected in parallel with its INPUT terminals, so they can be used to connect multiple SR-18 enclosures in parallel.

What optional Quick Mount brackets are available for the SR-18?

QSC lists the QM-SW with 0° tilt and the QM-BW with 8° tilt as optional Quick Mount brackets.

Download PDF (976 KB)

More QSC Manuals


View all QSC manuals →