This guide provides basic guidelines for the Emerson Wireless 781S Smart Antenna. It does not contain procedures for diagnosis, maintenance, service, or troubleshooting. For detailed information and instructions, refer to the Emerson Wireless 1410S Gateway and 1410S Smart Antenna Reference Manual. The manual and this guide are also available in electronic data form at Emerson.com/Rosemount. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference; and this device must accept any interference received, including interference that may cause undesired operation. This device must be installed and operated with minimum distance of 20 cm between the antenna and all persons.
This Japanese quick start guide (document 00825-0704-4410, Rev. AD, December 2022) provides basic guidelines for the Emerson Wireless 781S Smart Antenna. It states that it does not contain diagnostic, maintenance, servicing, or troubleshooting procedures and refers to the Emerson Wireless 1410S Gateway and 1410S Smart Antenna Reference Manual for more information.
The guide covers wireless planning and power-up order, antenna position, system architecture, pipe mounting, and power and data wiring. It also includes best practices, operation verification, product certifications, and reference data. The 781S is described as fully wired and requiring only connection and power at the gateway. This manual is written in Japanese.
| Minimum antenna separation from persons | 8 in. (20 cm) |
|---|---|
| Recommended distance from large structures or conductive surfaces | About 3 ft (1 m) vertically |
| Horizontal separation between multiple antennas | 3 ft |
It should be placed about 3 ft (1 m) away vertically.
Connect positive power to +, negative power to –, data+ to A (+), data– to B (–), and ground to the gateway shield connection.
White carries RS-485 communication A, and blue carries RS-485 communication B.