The HC4P5509A1R3060 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Ring) and the low voltage filtering and coding/decoding functions of the line card. Together with a secondary protection diode bridge and “feed” resistors, the device will withstand 1000V lightning induced surges, in plastic packages. The SLIC also maintains specified transmission performance in the presence of externally induced longitudinal currents. The BORSCHT functions that the SLIC provides are: • Battery Feed with Subscriber Loop Current Limiting • Overvoltage Protection • Ring Relay Driver • Supervisory Signaling Functions • Hybrid Functions (with External Op Amp) • Test (or Battery Reversal) Relay Driver In addition, the SLIC provides selective denial of power to subscriber loops, a programmable subscriber loop current limit from 20mA to 60mA, a thermal shutdown with an alarm output and line fault protection. Switch hook detection, ring trip detection and ground key detection functions are also incorporated in the SLIC device. The HC4P5509A1R3060 SLIC is ideally suited for line card designs in PBX and CO systems, replacing traditional transformer solutions.
The Intersil HC5509A1R3060 is a Subscriber Line Interface Circuit (SLIC) manufactured using a Dielectric Isolation (DI) process. It integrates most BORSCHT functions on a monolithic IC to serve as a high-voltage interface between the telephone subscriber pair and low-voltage filtering or coding/decoding functions in line cards.
Key features include controlled supply of battery feed current with programmable limits, internal ring relay and utility relay drivers, and high impedance mode for the subscriber loop. The device supports selective power denial to subscribers while maintaining voice path activity and includes an on-chip operational amplifier for 2-wire impedance matching.
| Operating Temperature Range | 0°C to +75°C |
|---|---|
| Loop Current Limit Range | 20mA to 60mA |
It is designed for use as a high voltage interface between the traditional telephone subscriber pair and low voltage filtering functions in line card designs.
Yes, it includes an on-chip op amp for 2-wire impedance matching.
The relay drivers operate with a supply voltage from +5V to +12V.