The HS-2520RH is a radiation hardened monolithic operational amplifier which delivers an unsurpassed combination of specifications for slew rate, bandwidth and settling time. This dielectrically isolated amplifier is designed for closed loop gains of 3 or greater without external compensation. In addition, this high performance component also provides low offset current and high input impedance.
This Intersil data sheet (File Number 3599.2, August 1999) covers the HS-2520RH, a radiation hardened monolithic operational amplifier built on a dielectrically isolated process. The device is designed for closed loop gains of 3 or greater without external compensation, and the sheet lists features such as 100V/µs minimum slew rate, 10MHz minimum gain bandwidth, 50MΩ minimum input impedance, 25nA maximum offset current and 6mA maximum quiescent supply current. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus, and the listed SMD numbers must be used when ordering.
The document includes ordering information and pinouts for the HS7/HS7B CERDIP and SBDIP packages and the HS2 metal can package, timing waveforms and a simplified test circuit, typical performance curves, a suggested VOS adjustment circuit, burn-in and irradiation circuits, a schematic diagram, and die characteristics such as die dimensions, interface materials and transistor count. Applications named in the sheet are data acquisition systems, RF amplifiers, video amplifiers, signal generators and pulse amplifiers.
| Slew Rate | 100V/µs Min, 120V/µs (Typ) |
|---|---|
| Gain Bandwidth | 10MHz Min, 20MHz (Typ) |
| Power Bandwidth | 1.5MHz (Min) |
| Input Impedance | 50MΩ Min, 100MΩ (Typ) |
| Offset Current | 25nA (Max) |
| Settling Time (0.1% of 10V step) | 200ns (Typ) |
| Quiescent Supply Current | 6mA (Max) |
| Gamma Dose | 1 x 10 4RAD(Si) |
| Die Dimensions | 65 mils x 50 mils x 19 mils (1660µm x 1270µm x 483µm) |
| Transistor Count | 40 |
The data sheet rates the slew rate at 100V/µs minimum and 120V/µs typical.
It is designed for closed loop gains of 3 or greater without external compensation.
Detailed electrical specifications are contained in SMD 5962-95685, and the SMD numbers listed must be used when ordering.
The HS2-2520RH-Q, HS7-2520RH-Q and HS7B-2520RH-Q parts are listed with a temperature range of -55 to 125 °C.