Ricoh RP111x Series LDO Regulator Datasheet

The RP111x Series are CMOS-based LDO regulators featuring 500mA output current. The input voltage is as low as 1.4V and the output voltage can be set from 0.7V. Due to a built-in 0.46Ω (at VOUT=2.8V) on-resistor, RP111x can provide a low dropout voltage. RP111x also features an excellent line transient response, ripple rejection at 75dB, and low noise. The output voltage accuracy is as high as ±0.8% and the temperature drift coefficient of output voltage is low at ±30ppm/℃. The accuracy of the output voltage of RP111x includes the temperature characteristics and the load transient response has been improved. The typ. and max value of under/overshoot for various output current are shown in the typical characteristics in the datasheet, therefore the accuracy of the output voltage estimation will be easy on the actual operating cases. In addition to a fold-back protection circuit built into conventional regulators, RP111x contains a thermal shutdown circuit and an inrush current limit circuit. SOT-23-5 and SOT-89-5 packages, a 1.2mm square DFN1212-6 package are available.


Ricoh RP111x Series LDO Regulator Datasheet - cover page
Brand
Ricoh
Category
Power Management
Document type
Datasheet
Language
English
Pages
35
File format
PDF
File size
1.2 MB
Published
09 July, 2012
Updated
30 September, 2023
Model
RP111X
MD5 checksum
FA761FBD157CCF3D36B8EB1F441EDA1D

About this manual

The RP111x Series are CMOS-based Low Dropout (LDO) regulators designed for applications requiring a low input voltage as low as 1.4V. The series supports an output voltage range from 0.7V to 3.6V with high accuracy of +0.8% and a low temperature drift coefficient of +30ppm/°C.

Key features include excellent line transient response, ripple rejection up to 75dB at 1kHz, and built-in protection circuits such as fold-back current limiting, thermal shutdown, and inrush current limiting. The devices are available in SOT-23-5, SOT-89-5, and DFN1212-6 packages.

What's inside

  • Outline
  • Features
  • Applications
  • Selection Guide
  • Pin Configurations
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Typical Applications

Specifications

Output Current500mA
Input Voltage Range1.4V to 5.25V
Output Voltage Range0.7V to 3.6V
Dropout Voltage (Typ.)0.23V
Ripple Rejection (Typ.)75dB @ 1kHz
Output Voltage Accuracy+0.8%
Temperature Drift Coefficient+30ppm/°C

Frequently asked questions

What packages are available for the RP111x series?

The devices are available in SOT-23-5, SOT-89-5, and DFN1212-6 packages.

What capacitor value is recommended for stable operation?

It is recommended to use a ceramic capacitor of 1.0uF or more.

Download PDF (1.2 MB)

More Ricoh Manuals


View all Ricoh manuals →