Maxim DS7505 Digital Thermometer and Thermostat Datasheet

DS7505 is a low voltage (1.7V to 3.7V) digital thermometer and thermostat that provides 9-, 10-, 11-, or 12-bit digital temperature readings over a -55°C to +125°C range with ±0.5°C accuracy over a -0°C to +70°C range. A 9-bit resolution mode is software compatible with the LM75. Communication with the DS7505 is achieved through a simple 2-wire serial interface. Three address pins allow up to eight DS7505 devices to operate on the same 2-wire bus, which greatly simplifies distributed temperature-sensing applications. The DS7505 thermostat has a dedicated open-drain output (O.S.) and programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S. is activated. There are two thermostatic operating modes that control thermostat operation based on user-defined trip points (TOS and THYST) that are stored in EEPROM registers.


Maxim DS7505 Digital Thermometer and Thermostat Datasheet - cover page
Brand
Maxim
Category
Other Electronics
Document type
Datasheet
Language
English
Pages
14
File format
PDF
File size
197 KB
Published
11 April, 2012
Updated
30 September, 2023
Model
DS75
MD5 checksum
56473D7524918956C080835D6EE2E881

About this manual

The DS7505 digital thermometer and thermostat operates from 1.7 V to 3.7 V and measures temperatures from –55 °C to +125 °C with configurable resolution of 9 to 12 bits. It communicates via a simple 2‑wire serial interface and supports up to eight devices on the same bus using three address pins.

The device includes a dedicated open‑drain thermostat output, programmable fault tolerance, and a shutdown mode for low‑power applications. All settings are stored in non‑volatile EEPROM and can be copied from shadow SRAM. Package options include 8‑pin SO and pMAX® packages.

What's inside

  • General Description
  • Features
  • Applications
  • Absolute Maximum Ratings
  • DC Electrical Characteristics
  • AC Electrical Characteristics
  • Pin Description
  • Operation—Measuring Temperature
  • Shutdown Mode
  • Configuration Register

Specifications

Supply voltage range1.7 V to 3.7 V
Temperature measurement range-55 °C to +125 °C
Resolution options9‑12 bits (0.5 °C to 0.0625 °C)
9‑bit conversion time25 ms (max)
Accuracy±0.5 °C over 0 °C to +70 °C
Interface2‑wire serial (SDA, SCL)
Address pinsThree (A0, A1, A2) allowing up to 8 devices
Package types8‑pin SO and pMAX®

Frequently asked questions

What supply voltage does the DS7505 require?

The DS7505 operates from 1.7 V to 3.7 V supply voltage.

How many address pins are on the DS7505 and what do they enable?

It has three address pins (A0, A1, A2) that allow up to eight DS7505 devices on the same 2‑wire bus.

What is the default resolution of the DS7505 at power‑up?

The factory default resolution at power‑up is 9 bits.

Download PDF (197 KB)

More Maxim Manuals


View all Maxim manuals →