BAM 210 Operation Manual, introduce BAM 210's features, usage instructions, etc.
This manual covers safety warnings, installation instructions, and detailed descriptions of the front‑panel and rear‑panel controls for the Peavey BAM 210 bass modeling amplifier. It explains how to select amp and cabinet models, use the built‑in compressor, effects, and tuner, and how to operate the footswitch and MIDI interfaces.
Technical specifications are listed, including power consumption, circuit‑breaker rating, input sensitivity, output power, dimensions, and weight. The document also provides troubleshooting tips such as resetting the internal circuit breaker and configuring the DDT speaker‑protection feature.
| Power consumption (120 VAC) | 500 W |
|---|---|
| Mains circuit breaker | 6 A (resettable) |
| Input sensitivity | 1.0 V RMS |
| Output power (2 Ω) | 500 W (31.62 V RMS) |
| Dimensions (H × W × D) | 24 in × 23.5 in × 17.125 in |
| Weight | 93.5 lb |
Use the MODEL SELECTOR control to choose an amp model, then press the CAB SWAP button to change the cabinet model without altering the amp selection.
Set the DDT selector switch to the OUT position; this activates the distortion detection circuit that compresses the signal to protect the speakers.