Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The system board has failed due to DMA or timer issues. The manual's first action is: “1. Clear CMOS. (See Password security and resetting CMOS on page 114.)”
The system detected a checksum error in the ROM or expansion board. The manual's first action is: “1. Verify the correct ROM.”
All 16 error codes of the HP 800 G4 SFF HP 800 G4 SFF with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Protocol wrong type for socket The manual lists no action for this code.
Protocol not supported (protocol other than UDP, TCP, or RAW specified) The manual's first action is: “Close the local socket and try reopening it.”
Connection to the remote socket was broken during transmission (EPIPE). The manual's first action is: “Close the local socket.”
EMFILE indicates too many open files (more than 32 sockets) The manual lists no action for this code.
Invalid argument error in socket library usage The manual lists no action for this code.
EFAULT indicates a bad address during memory copy between kernel and user areas. The manual's first action is: “Close the local socket and try reopening it.”
EBADF indicates an incorrect socket specification. The manual lists no action for this code.
The system detected a non-existent process. The manual's first action is: “Close the local socket and try reopening it.”
The CPU Unit failed to write clock data during a refresh operation. The manual's first action is: “Clear the CPU Unit error.”
Mail communications error occurred during FINS communication. The manual's first action is: “Refer to the Operation Manual, Construction of Applications: Creating FINS Applications, and correct the remote node (i.e., …
The system cannot establish a connection to the server. The manual's first action is: “Take either of the following measures. • Correct the settings for each server. • Inspect the communications path (Ethernet Unit, c…
FINS/UDP packet discarded due to static IP address conversion method. The manual's first action is: “The automatic generation (static) method was used as the IP address conversion method, so remote IP address informat…