Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The machine triggered a stop because the tool path entered a restricted area. The manual's first action is: “AUTO mode: correct the G code execution path.”
The spindle command speed exceeds the maximum allowable speed. The manual's first action is: “Rede fine the spindle speed.”
The spindle is not rotating during machining operations. The manual's first action is: “Make sure the spindle rotation command is issued.”
The amount of interface data processed exceeds the preset limit, such as during tool changes or variable writing. The manual's first action is: “Check if the G codes and MLC processing actions are operating normally.”
An axis does not receive motion commands because the servo is turned off. The manual's first action is: “Check if the command axis is in the Servo Off state.”
Command transfer is not permitted while operating in MDI mode. The manual's first action is: “Command transfer can only be done before the machining program is executed.”
The tool compensation number in the G code exceeds the allowed range. The manual's first action is: “Adjust the tool compensation number setting in the G code.”
Synchronous function is enabled but slave axis motion amounts are specified in G code. The manual's first action is: “Check the machining program.”
A breakpoint search was assigned to an invalid M99 line in the program. The manual's first action is: “Reset the breakpoint search line number.”
The number of connected axes does not match the parameter setting for servo control. The manual's first action is: “Check the set channel port number and the connecting servo station number setting.”
The tool number specified during a tool change or T code execution is incorrect. The manual's first action is: “Check the changed tool number and if the T code setting is within the tool setting range.”
The arc radius calculation in the program has failed due to an error. The manual's first action is: “Check the arc machining program or increase the tolerance for arc radius error.”
The feed rate in the machining program is not defined. The manual's first action is: “Check the machining program and define the feed rate.”
The system encountered an error accessing the buffer for computing interpolator commands. The manual's first action is: “Reload the machining program or update the firmware.”
An error occurred during interpolator command index computation. The manual's first action is: “Reload the machining program or update the firmware.”