Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The MLC axis is still moving when the system switches between MLC and NC modes on this Delta IA-CNC_Milling machine. The manual's first action is: “Modify the MLC program.”
The home sensor is malfunctioning or improperly installed on this Delta IA-CNC_Milling machine. The manual's first action is: “Check if the home sensor is installed correctly.”
The axis position has exceeded the second software limit on this Delta IA-CNC_Milling machine. The manual's first action is: “Move the axis into the legal restricted range.”
The axis position has exceeded the first software limit on this Delta IA-CNC_Milling machine. The manual's first action is: “Move the axis into the legal restricted range.”
A hardware limit has been triggered on an axis of this Delta IA-CNC_Milling machine. The manual's first action is: “Move the axis into the legal restricted range.”
The following error exceeds acceptable limits on this Delta IA-CNC_Milling machine, indicating a servo parameter issue. The manual's first action is: “Make sure the servo parameter setting is correct.”
Synchronous interpolation between linear and rotary axes is unsupported for milling or lathe operations on this Delta IA-CNC_Milling machine. The manual's first action is: “NC200 does not support tapping. Use NC300 or…
The feed rate has been set to a negative value on this Delta IA-CNC_Milling machine. The manual's first action is: “Check the G code and adjust the feed rate.”
An invalid halt code was used in the G code for this Delta IA-CNC_Milling machine. The manual's first action is: “Check the G code and the halt code (M code) must be used individually.”
A user-defined macro alarm has been triggered on this Delta IA-CNC_Milling machine due to incorrect parameter usage. The manual's first action is: “#6000 in the G code must not be specified as 0.”
The line number specified in a GOTO command is invalid or missing in the G code for this Delta IA-CNC_Milling machine. The manual's first action is: “Check the G code and specify the correct line number.”
A GOTO tag referenced in the G code does not exist on this Delta IA-CNC_Milling machine. The manual's first action is: “Check the G code and specify the correct tag.”
An illegal macro command has been issued on this Delta IA-CNC_Milling machine. The manual's first action is: “Check the macro and modify the program.”
The macro operand syntax is in error on this Delta IA-CNC_Milling machine. The manual's first action is: “Check the macro and modify the program.”
Macro Cmd syntax error happens when the macro's syntax usage violates system rules or conventions. The manual's first action is: “Check the macro and modify the program.”