Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeHP 800 G4 SFF Error 419: Out of Memory Space for Option ROMs

  The system lacks sufficient memory space to download option ROMs from a recently added PCI expansion card. The manual's first action is: “If a PCI expansion card was recently added, remove it to see if the problem rem…

• CodeHP 800 G4 SFF Error 005: Real-Time Clock Power Loss

  The Real-Time Clock has lost power due to an invalid date or time in memory. The manual's first action is: “Reset the date and time under Control Panel (Computer Setup can also be used). If the”

• CodeHP 800 G4 SFF Error 003: System Board Failure

  The system board has failed due to DMA or timer issues. The manual's first action is: “1. Clear CMOS. (See Password security and resetting CMOS on page 114.)”

• CodeHP 800 G4 SFF Error 002: Option ROM Checksum Error

  The system detected a checksum error in the ROM or expansion board. The manual's first action is: “1. Verify the correct ROM.”

• Code listHP 800 G4 SFF Error Codes

  All 16 error codes of the HP 800 G4 SFF HP 800 G4 SFF with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 003D: EPROTOTYPE

  Protocol wrong type for socket The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 003C: EPROTONO-SUPPORT

  Protocol not supported (protocol other than UDP, TCP, or RAW specified) The manual's first action is: “Close the local socket and try reopening it.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0020: EPIPE

  Connection to the remote socket was broken during transmission (EPIPE). The manual's first action is: “Close the local socket.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0018: EMFILE

  EMFILE indicates too many open files (more than 32 sockets) The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0016: EINVAL

  Invalid argument error in socket library usage The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 000E: EFAULT

  EFAULT indicates a bad address during memory copy between kernel and user areas. The manual's first action is: “Close the local socket and try reopening it.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0009: EBADF

  EBADF indicates an incorrect socket specification. The manual lists no action for this code.

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 0003: ESRCH

  The system detected a non-existent process. The manual's first action is: “Close the local socket and try reopening it.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 03C6: Clock data write error

  The CPU Unit failed to write clock data during a refresh operation. The manual's first action is: “Clear the CPU Unit error.”

• CodeOmron CS1W-ETN21, CJ1W-ETN21 Error 03C5: Mail communications error

  Mail communications error occurred during FINS communication. The manual's first action is: “Refer to the Operation Manual, Construction of Applications: Creating FINS Applications, and correct the remote node (i.e., …