Industrial

AD8061/AD8062/AD8063 are low-cost, 300 MHz rail-to-rail amplifiers. Features low offset voltage, high output swing, high speed, low power consumption. Mainly used in imaging, photodiode preamplifiers, professional video and cameras, hand sets, DVDs/CDs, base stations, filters, ADC drivers, etc.

The LT ®1506 is a 500kHz monolithic buck mode switching regulator functionally identical to the LT1374 but optimized for lower input voltage applications. It will operate over a 4V to 15V input range compared with 5.5V to 25V for the LT1374. A 4.5A switch is included on the die along with all the necessary oscillator, control and logic circuitry. High switching frequency allows a considerable reduction in the size of external components. The topology is current mode for fast transient response and good loop stability. Both fixed output voltage and adjustable parts are available. A special high speed bipolar process and new design tech- niques achieve high efficiency at high switching frequency. Efficiency is maintained over a wide output current range by keeping quiescent supply current to 4mA and by utiliz- ing a supply boost capacitor to saturate the power switch. The LT1506 fits into standard 7-pin DD and fused lead SO-8 packages. Full cycle-by-cycle short-circuit protection and thermal shutdown are provided. Standard surface mount external parts are used, including the inductor and capacitors. There is the optional function of shutdown or synchronization.

110-150w ac-dc open-frame power supplies, available with single, triple or quad outputs, meet en61000-3-2 standard, support current sharing.

The ADC14L020 is a low power monolithic CMOS analog-to-digital converter capable of converting analog input signals into 14-bit digital words at 20 MSPS. It provides excellent dynamic performance and a 150 MHz Full Power Bandwidth.

The ADC12L030 family is a 12-bit plus sign successive approximation A/D converter with serial I/O and configurable input multiplexers. These devices are fully tested with a single 3.3V power supply. The ADC12L032, ADC12L034 and ADC12L038 have 2, 4 and 8 channel multiplexers, respectively. Differential multiplexer outputs and A/D inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12L030 has a two channel multiplexer with the multiplexer outputs and A/D inputs internally connected. On request, these A/Ds go through a self calibration process that adjusts linearity, zero and full-scale errors to less than ±1⁄2 LSB each. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +3.3V) can be accommodated with a single +3.3V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign two’s compliment output data format. The serial I/O is configured to comply with NSC’s MICROWIRE™ and Motorola’s SPI standards. For voltage references, see the LM4040 or LM4041 data sheets.

BAV19WS-V/20WS-V/21WS-V is a high voltage small signal switching diode produced by Vishay Semiconductors. It has the characteristics of silicon epitaxial planar diodes and is suitable for general purposes. This diode is also available in other case styles including: the DO35 case with the type designation BAV19-BAV21, the MiniMELF case with the type designation BAV100-BAV103, the SOT23 case with the type designation BAS19-BAS21 and the SOD123 case with the type designation BAV19W-V-BAV21W-V. This diode is a lead-free component and complies with RoHS 2002/95/EC and WEEE 2002/96/EC standards.

LM2590HV is a SIMPLE SWITCHER® Power Converter that operates at 150 kHz and can output 1A of current. It has excellent line and load regulation performance. This series of regulators has additional supervisory and performance features, requires the minimum number of external components, is easy to use, and includes internal frequency compensation, improved line and load specifications, a fixed-frequency oscillator, Shutdown/Soft-start, output error flag, and flag delay.

Vishay Semiconductors VLMK/Y62.. is one of the most robust and light efficient LEDs in the market. It is ideal for applications requiring high thermal considerations and long service life.

CNY75A/ B/ C/ GA/ GB/ GC is an optocoupler produced by Vishay Semiconductors, which has low coupling capacitance and high common mode rejection.

This document introduces the features and characteristics of the LT1086 series products, including adjustable or fixed 3.3V, 3.6V, 5V, 12V output voltage, 1.5A output current, 1V input-output differential, guaranteed voltage drop at multiple current levels, 0.015% line regulation, 0.1% load regulation, 100% thermal limit functional test, >75dB ripple rejection.

QN is a new type of connector introduced by HUBER+SUHNER, which has similar performance as N connector but is easier to install

The BAT54WS-V is a small signal Schottky diode produced by Vishay Semiconductors. It features very low turn-on voltage and fast switching. These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges. The device is lead-free and complies with RoHS 2002/95/EC and WEEE 2002/96/EC standards.

The TFBS4711 is a low power infrared receiver/transmitter, features a small package and is compliant with the latest IrDA physical layer low power specification.

The ADS8331/ADS8332 is a low-power, 16-bit, 500k samples per second (SPS) analog-to-digital converter with a unipolar, 4:1 multiplexer (mux) input and a serial interface.

LM22673 3A SIMPLE SWITCHER is a step-down voltage regulator with adjustable soft-start and current limit designed by National Semiconductor Corporation. It uses internal compensation voltage mode control, input voltage range is 4.5V to 42V, output voltage is adjustable, and it has over-temperature shutdown and current limiting function.