Industrial

The LM5070 is an integrated power interface port and pulse width modulation (PWM) controller for Powered Devices (PD) that connect into Power over Ethernet (PoE) systems. It integrates an 80V, 400mA line connection switch and associated control for a fully IEEE 802.3af compliant interface with a full featured current mode pulse width modulator dc-dc converter.

TEKT5400S is a high sensitive silicon NPN epitaxial planar phototransistor in a flat side view plastic package. A small recessed lens provides a high sensitivity in a low profile case. The molded package itself is an IR filter, spectrum matched to IR emitters (λp > 850 nm or 950 nm).

FPF2500-FPF2506 IntelliMAX™ Advanced Load Management Products is a family of load switches that provide full protection to systems and loads. They have features such as a 4.5 to 20V input voltage range, controlled turn-on, 0.4A, 0.8A, and adjustable current limit options, undervoltage lockout, thermal shutdown, <10uA shutdown current, auto restart, and fault blanking.

DS2405 is a 1-Wire addressable switch device from Maxim. It features a 64-bit registration number and a single data pin, and can communicate on a 1-Wire bus.

LM117/LM317A/LM317 3-terminal adjustable regulator is a 3-terminal adjustable regulator with excellent performance. It is packaged in standard transistor packages and has current limit, thermal overload protection and safe area protection. It is widely used in various electronic circuits.

LMH6723/LMH6724/LMH6725 is a single/dual/quad 370MHz 1mA current feedback operational amplifier. Its features include 370MHz bandwidth, 1mA current consumption, 110mA linear output current, 0.03%, 0.11˚ differential gain and phase, 0.1dB gain flatness to 100MHz, fast slew rate: 600V/µs, single supply range 4.5 to 12V. It is widely used in portable devices.

Introduction to the characteristics and applications of Schottky diodes

The ADC102S101 is a low-power, two-channel CMOS 10-bit analog-to-digital converter from ADI that supports sample rates up to 1MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept one or two input signals, respectively, at inputs IN1 and IN2. The output serial data is straight binary, and is compatible with several standards, such as SPI, QSPI, MICROWIRE, and many common DSP serial interfaces. The ADC102S101 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 3.9 mW and 11.4 mW, respec- tively. The power-down feature reduces the power consump- tion to just 0.12 µW using a +3.6V supply, or 0.47 µW using a +5.5V supply. The ADC102S101 is packaged in an 8-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.

This document describes the features and characteristics of Vishay Semiconductors VLMTG31.. SMD LED PLCC-2, including exceptional brightness, compatibility with automatic placement equipment, standard package, compatibility with various solder processes, low power consumption, etc.

The DS2430A is a 256-bit electrically erasable programmable read-only memory (EEPROM) plus 64-bit one-time programmable application register.

This file introduces the characteristics of LM194 and LM394 Supermatch Pair products. These two products are junction isolated ultra well-matched monolithic NPN transistor pairs with an order of magnitude improvement in matching over conventional tran- sistor pairs

This document introduces the features and characteristics of the 4129L-CAN product

The ADC121S021 is a single channel, 50 to 200 ksps, 12-bit A/D converter from ADI with high performance, low power consumption and multiple interfaces.

The LP3982 is a micropower, ultra low-dropout, low-noise CMOS linear regulator available in various voltage versions. It provides an output current of 300mA. The LP3982 is suitable for battery-powered applications due to its low shutdown current, low quiescent current, and low dropout voltage. It features stable operation with small ceramic capacitive loads, high power supply rejection ratio (PSRR), wide input voltage range, fast turn-on time, low output voltage noise, and over temperature/over current protection.