Industrial

AD9276 is an 8-channel LNA/VGA/AAF/12-bit ADC and CW I/Q demodulator

The document introduces a unique EPROM product with 16384 bits of storage space, which communicates with the economy of one signal plus ground. It has a unique 64-bit registration number that ensures absolute traceability because no two parts are alike. The built-in multidrop controller ensures compatibility with other 1-Wire® Net products. The EPROM is partitioned into sixty-four 256-bit pages for randomly accessing packetized data records. Each memory page can be permanently write-protected to prevent tampering. The device is an “add only” memory where additional data can be programmed into EPROM without disturbing existing data. The architecture reduces control, address, data, power, and programming signals to a single data pin. It directly connects to a single port pin of a microprocessor and communicates at up to 16.3 kbits per second. The 8-bit family code specifies communications requirements to reader DS2505. The presence detector acknowledges when the reader first applies voltage. The product is available in a low-cost TO-92 or 6-pin TSOC surface mount package. It reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C and programs at 11.5V to 12.0V from -40°C to +50°C.

ADC082S021 2 Channel, 200 KSPS, 8-Bit A/D Converter

TSH690 is a wide band RF amplifier, designed in advanced bipolar process. At 450 MHz, it features 28dB gain and +13.5dBm (20 mW) out- put power at 3V. At 900 MHz, it features 23 dB gain and +15.5 dBm (35 mW) output power at 3V.

the lp3981 is an ultra low dropout cmos voltage regulator from nsc company. it features high performance, low power consumption and low noise. the product is ideal for mobile phone and similar battery powered wireless applications. it provides up to 300ma of current, input voltage range from 2.5v to 6v, and consumes less than 1µa in disable mode. the lp3981 is available in msop-8 package, and can provide 2.5v, 2.7v, 2.8v, 2.83v, 3.0v, 3.03v and 3.3v standard output voltages. other output voltages can be customized according to customer needs.

ExpressLane™ PCI Express-to-PCI/PCI-X Bridge is a high performance bridge that enables designers to migrate legacy PCI and PCI-X bus interfaces to the new advanced serial PCI Express™ interface. This flexible device supports forward and reverse bridging, and also supports transparent bridging.

The NCP1400A series is a micropower step-up DC to DC converter designed specifically for powering portable equipment from one or two cell battery packs. These devices can start up with a voltage of 0.8V and operate down to as low as 0.2V. With only four external components, this series allows for the implementation of highly efficient converters capable of delivering up to 100mA of output current. Each device includes an on-chip fixed frequency oscillator, pulse width modulation controller, phase compensated error amplifier for stable operation in discontinuous mode, soft-start, voltage reference, driver, and power MOSFET switch with current limit protection. Additionally, there is a chip enable feature to power down the converter and extend battery life. The NCP1400A devices are available in the Thin SOT23-5 package with seven standard regulated output voltages. Additional voltages ranging from 1.8V to 4.9V in 100mV steps can be manufactured.

The document describes the features and characteristics of the TPS68000 highly efficient phase shift full bridge CCFL controller, including input voltage range, full bridge topology with integrated gate drives, synchronizable constant frequency operation, etc.

The LM1815 is an adaptive sense amplifier and default gating circuit for motor control applications. It provides a one-shot pulse output whose leading edge coincides with the negative-going zero crossing of a ground referenced input signal such as from a variable reluctance magnetic pick-up coil. The adaptive sense amplifier operates with a positive-going threshold derived by peak detecting the incoming signal and dividing it down. The minimum input signal is 150mVP-P.

AD9231 is a 12-bit, 20 MSPS/40 MSPS/65 MSPS/80 MSPS, 1.8 V dual analog-to-digital converter.

The DS90LV018A is a single CMOS differential line receiver from Linear Technology, designed for applications requiring ultra low power dissipation, low noise and high data rates. The device is designed to support data rates in excess of 400 Mbps (200 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90LV018A accepts low voltage (350 mV typical) differential input signals and translates them to 3V CMOS output levels. The receiver also supports open, shorted and terminated (100Ω) input fail-safe. The receiver output will be HIGH for all fail-safe conditions. The DS90LV018A has a flow-through design for easy PCB layout. The DS90LV018A and companion LVDS line driver provide a new alternative to high power PECL/ECL devices for high speed point-to-point interface applications.

BPV10NF is a high sensitive and wide bandwidth PIN photodiode in a standard T-1¾ plastic package. The black epoxy is a universal IR filter, spectrally matched to GaAs (λ = 950 nm) and GaAlAs (λ = 870 nm) IR emitters. BPV10NF is optimized for serial infrared links according to the IrDA standard. Features include extra fast response times, high modulation bandwidth (>100 MHz), high radiant sensitivity, radiant sensitive area A = 0.78 mm2, low junction capacitance, standard T-1¾ (∅ 5 mm) package with universal IR filter, angle of half sensitivity ϕ = ± 20°.

L6599 is a high-voltage resonant controller from ST company, it features 50% duty cycle, variable frequency control of resonant half-bridge, high-accuracy oscillator, up to 500kHz operating frequency, two-level OCP, interface with PFC controller, latched disable input, light load burst-mode operation, input for power-ON/OFF sequencing or brownout protection, non-linear soft-start for monotonic output voltage rise, 600V-rail compatible high-side gate driver with integrated bootstrap diode and high dV/dt immunity, -300/800mA high-side and low-side gate drivers with UVLO pull-down

TSAL6100 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology from Vishay Semiconductors. It features extra high radiant power and radiant intensity, high reliability, low forward voltage, suitable for high pulse current operation, and good spectral matching to Si photodetectors. It is suitable for applications such as infrared remote control units with high power requirements, free air transmission systems, infrared source for optical counters and card readers, IR source for smoke detectors.

DS2506 is a 64K bit Electrically Programmable Read Only Memory (EPROM) that communicates with the economy of one signal plus ground