Industrial

AD7147 is a programmable single-electrode capacitance sensor CapTouch controller with femtofarad resolution and 13 capacitance sensor inputs. It features automatic calibration logic and automatic compensation for environmental changes, making it suitable for various applications.

The AD6655 Rev. A is a high-performance dual-channel ADC that features high dynamic range, low noise, wide bandwidth, and high sample rate. The device operates from a 1.8V supply and supports 1.8V to 3.3V output voltage, making it compatible with a wide range of CMOS devices. The AD6655 Rev. A integrates a digital downconverter (DDC), digital mixer (DM), and digital filter, making it ideal for high-performance communications systems.

The AS2431 is a three-terminal adjustable shunt regulator providing a highly accurate bandgap reference. The adjustable shunt regulator is ideal for a wide variety of linear applications that can be implemented using external components to obtain adjustable currents and voltages. The AS2431 is a direct replacement for the AS431 in low voltage, low current applications.

The AD7294 is a 12-bit monitor and control system with multichannel ADC, DACs, temperature sensor, and current sense function.

The AD7148 is a programmable touch controller designed specifically for single-electrode capacitance sensors. It features 500-millionths of a farad resolution, eight capacitance sensor inputs, a 25-millisecond update rate, and does not require external RC components. The AD7148 also features automatic calibration logic, environmental compensation, and automatic adaptive threshold and sensitivity levels.

The AS168X is a high-performance thermal magnetic CBE that is able to dramatically reduce the through current during short-circuit tripping. The series is available in versions with one to four protected poles that can be used in AC or DC networks. Multipole CBEs are mechanically connected internally and at the toggle lever to ensure simultaneous switching. This also applies to a combination with the switchable neutral pole. Cleverly designed Lift terminals on the input and output side enable convenient grid and load connection. The terminals are suitable for connecting conductors with a cross section of 1.5 to 25 mm2 (AWG #16.4). The AS168X can be used as a device protection switch according to UL 1077 / EN 60934 or as a motor protection switch according to UL 508 or CSA 22.2 14. The switch is therefore versatile and suitable for the following functions: • Motor overload protection (thermal and magnetic) • Motor starting across-the-line (direct-on-line) • Motor starting with motor disconnect (cos phi 0,4 – 0,5) • Motor group installation (short capacity 5 kA) • Control circuits

This document describes the features and characteristics of the 11-Bit, 200 MSPS, 1.8 V Analog-to-Digital Converter AD9230-11. The converter has high signal-to-noise ratio, excellent linearity, low power dissipation, and is suitable for applications such as wireless and wired broadband communications.

The APW7016 is a complete control and protection circuit for a DC-DC converter optimized for high performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous rectified buck topology. The APW7016 integrates output voltage control, monitoring and protection functions into a single Package. The APW7016 includes a 3-bit digital-to-analog converter (DAC) that provides a easily adjustable and precisely output voltage from 1.3VDC to 1.65VDC in 0.05V steps. Any selected output voltage can be maintained within ±1% accuracy over temperature and line voltage variations. The APW7016 also features with multiple protections against over-current and over-voltage conditions by inhibiting PWM operation.

APTDF400AK170 is a dual diodes power module produced by APT company. This module features ultra fast recovery times, soft recovery characteristics, high blocking voltage, high current, low leakage current, low stray inductance, etc. It is applied to anti-parallel diode, uninterruptible power supply (UPS), induction heating, welding equipment, high speed rectifiers, etc.

This document describes the features and characteristics of the 16-bit, 4-channel/8-channel, 250 kSPS PulSAR ADC. It features 16-bit resolution with no missing codes, a 4-channel (AD7682)/8-channel (AD7689) multiplexer with choice of inputs, unipolar single-ended, differential (GND sense), and pseudobipolar input modes, a throughput of 250 kSPS, INL of ±0.4 LSB typical, ±1.5 LSB maximum (±23 ppm or FSR), a dynamic range of 93.8 dB, SINAD of 92.5 dB at 20 kHz, THD of -100 dB at 20 kHz, an analog input range of 0 V to VREF with VREF up to VDD, support for multiple reference types including internal selectable 2.5 V or 4.096 V, external buffered (up to 4.096 V), and external (up to VDD), an internal temperature sensor (TEMP), a channel sequencer, selectable 1-pole filter, and busy indicator. It has no pipeline delay, uses a SAR architecture, and operates on a single supply of 2.3 V to 5.5 V with a 1.8 V to 5.5 V logic interface. The serial interface is compatible with SPI, MICROWIRE, QSPI, and other protocols.

The AD7262/AD7262-5 are dual, 12-bit, high speed, low power, successive approximation ADCs that operate from a single 5 V power sup, supports four comparators, with a on-chip reference voltage of 2.5 V.

AD9273 is a 8-channel LNA, VGA, AAF, and ADC from Analog Devices, featuring programmable gain and bandwidth.