Industrial

The AD7980 is a 16-bit, 1 MSPS PulSAR ADC with features such as low power dissipation, high accuracy, and single-supply operation. It can be widely used in battery-powered equipment, communications, ATE, data acquisition, and medical instrument applications.

The AD7766 is a high-performance, low-power, 24-bit ADC from Analog Devices that operates at up to 128 kSPS. The device uses an oversampled successive approximation (SAR) architecture and features a 115.5 dB dynamic range, a 109.5 dB dynamic range, and a -112 dB THD. Additionally, the AD7766 has a low power consumption of 8.5 mW, 10.5 mW, and 15 mW, a 24-bit no missing code (NMC) accuracy, a 15 nV/°C zero error drift, and a 0.4 ppm/°C gain error drift.

The AD7765 is a high performance, 24-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with 115 dB dynamic range and 156 kHz maximum output data rate. It features a fully differential modulator input, on-chip differential amplifier, on-chip reference buffer, and full band low-pass filter. The AD7765 also provides a low power mode, flexible SPI interface, overrange alert pin, digital gain correction registers, and power-down mode. It is suitable for applications such as data acquisition systems, vibration analysis, and instrumentation.

This document describes a high-performance 24-bit ∑-∆ ADC with a dynamic range of 115 dB and selectable oversampling rates. The product also features a flexible SPI interface, fully differential modulator input, on-chip differential amplifier, and reference buffer.

AD7366-5/AD7367-5 are dual-channel 12/14-bit true bipolar analog inputs SAR ADCs with a maximum sampling rate of 500 kSPS.

This document describes the features and characteristics of the 12-bit, 80 MSPS/105 MSPS/125 MSPS/150 MSPS, 1.8 V Dual Analog-to-Digital Converter AD9627.

AD9626 is a 12-bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V analog-to-digital converter with excellent linearity, low power and flexibility.

The ASM1233D-L/1233D/1233M are low-power, 5/3.3V µP Reset, with an active LOW, open-drain output. Maximum supply current over temperature is 15µA for 3.3V devices and 20µA for 5V devices. The ASM1233D-L/1233D/1233M generates an active LOW reset signal whenever the monitored supply is out of tolerance. A precision reference and comparator circuit monitors power supply (VCC) level. The tolerances are 5%, 10% and 15%. When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces an active LOW reset signal. After VCC returns to an in-tolerance condition, the reset signal remains active for 350ms to allow the power supply and system microprocessor to stabilize. The ASM1233D-L/1233D/1233M is designed with an open- drain output stage and operates over the extended industrial temperature range. These devices are available in compact SOT-223, SO-8 and TO-92 packages. Other low power products in this family include ASM1810/11/ 12/15/16/17.

The AD7984 is a 18-bit, 1.33 MSPS, 10.5 mW PulSAR ADC in MSOP/QFN.

This document introduces the Fairchild Power Switch(FPS) product family, which is specially designed for off-line SMPS with minimal external components. The product includes high voltage power SenseFET and current mode PWM IC. Compared to discrete MOSFET and controller or RCC switching converter solution, the included PWM controller features integrated fixed oscillator, under voltage lock out, leading edge blanking, optimized gate turn-on/ turn-off driver, thermal shut down protection, over voltage protection, and temperature compensated precision current sources for loop compensation and fault protection circuitry. The product can reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for cost-effective design in either a flyback converter or a forward converter.

The AD7151 is an ultra-low power, 1-channel, capacitance converter for proximity sensing. It features a fast response time and ultra-low power consumption.

AS7C3364NTF32B and AS7C3364NTF36B are 3.3V 64K × 32/36 flow-through synchronous SRAMs with NTD™ architecture for efficient bus operation. They feature fast clock to data access, fast OE access time, fully synchronous operation, flow-through mode, asynchronous output enable control, 100-pin TQFP package, byte write enables, operation hold clock enable, multiple chip enables for easy expansion, 3.3V core power supply, 2.5V or 3.3V I/O operation with separate VDDQ, self-timed write cycles, interleaved or linear burst modes, and snooze mode for standby operation.

The AD7150 is an ultra-low power, 2-channel capacitance converter designed for capacitive proximity sensors, featuring an ultra-low power converter with fast response time.

AS7C3256A-8 is a 3.3V 32K X 8 CMOS SRAM (Common I/O) with high speed, low power consumption and easy expansion.

This document describes the features and characteristics of Alliance Semiconductor's AS7C1024A and AS7C31024A CMOS SRAM products, including industrial and commercial temperature ranges, organization structure, high-speed access time, low power consumption, easy expansion, compatibility, and packaging types.