Industrial

The CBTLV3384 is a ten bit high-speed bus switch with low on-state resistance of the switch allowing connections to be made with minimal propagation delay. The device is organized as dual 5-bit bus switches with separate output-enable (OE) inputs, to allow use as two 5-bit bus switches or one 10-bit bus switch. When OE is low, the associated 5-bit bus switch is on and A port is connected to B port. When OE is high, the switch is open, and a high- impedance state exists between the two ports. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The AD5398 is a single 10-bit DAC with 120 mA output current sink capability. It features an internal reference and operates from a single 2.7 V to 5.5 V supply. The DAC is controlled via a 2-wire (I2C-compatible) serial interface that operates at clock rates up to 400 kHz. The AD5398 incorporates a power-on reset circuit, which ensures that the DAC output powers up to 0 V and remains there until a valid write takes place.

IDT74AUC16245 is a 1.8V CMOS 16-bit bus transceiver with 3-state outputs.

The ATF20V8B is a high performance CMOS (Electrically Erasable) Programmable Logic Device (PLD) that utilizes Atmel's proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% range for commercial temperature ranges.

This is a 32-channel, 14-bit DAC with programmable 50 V to 200 V full-scale output voltage.

AD5378 Rev. A is a 32-channel, 14-bit, parallel and serial input, bipolar voltage output DAC from Analog Devices.

The AD5063 is a 16-bit single-channel precision D/A converter from Analog Devices. It has a 1 LSB INL and single power supply, and can operate in the 2.7V-5.5V voltage range. The AD5063 is packaged in a 10-lead MSOP, and consumes very little power. It also has a fast settling time and low noise. The AD5063 is suitable for industrial control, data acquisition, and portable instruments.

This document describes the features and characteristics of the 16-bit, 400 MSPS Digital-to-Analog Converter AD9726 Rev. B, including dynamic performance, precision calibrated linearity, LVDS inputs, and differential current outputs.

AD5602/AD5612/AD5622 are 8-/10-/12-Bit nanoDACs® with I2C®-Compatible Interface in LFCSP and SC70 packages, supplied by Analog Devices, with a power supply range of 2.7 V to 5.5 V, and a power consumption of less than 100 µA.

The AD5061 is a single channel 16-bit buffered voltage output DAC with a supply voltage range of 2.7 V to 5.5 V in a SOT-23 package. The device offers ±4 LSB of relative accuracy and guaranteed monotonicity with a ±1 LSB DNL specification. The AD5061 uses a 3-wire serial interface that operates at clock frequencies up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The AD5061's external reference voltage is provided by the VREF pin. A reference buffer is also provided on-chip. The device also incorporates a power-on reset circuit that ensures that the DAC output is at the midscale level when the VREF pin voltage is 0 V and at the zero level when the VREF pin voltage is 2.5 V.

The AD5678 is a low-power, octal DAC with on-chip reference in a 14-lead/16-lead TSSOP package. The AD5678 features three power-down functions, hardware LDAC and LDAC override function, CLR function to programmable code, and rail-to-rail operation. The AD5678 is suitable for applications such as process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage current sources, and programmable attenuators.

The ATF-10236 is a high performance gallium arsenide Schottky-barrier- gate field effect transistor housed in a cost effective microstrip package.

The document describes a multichip module containing a field-programmable system-level integrated circuit (FPSLIC™) and secure configuration EEPROM memory. The product features 512 Kbits to 1 Mbit of configuration memory with security protection and in-system programming (ISP). The FPSLIC is an SRAM-based FPGA with an embedded high-performance RISC AVR® core and extensive data and instruction SRAM. It also includes a patented SRAM-based AT40K FPGA with 5,000 to 40,000 gates and FreeRAM™ feature, making it ideal for dynamically reconfigurable and low-power applications. The product utilizes a patented AVR enhanced RISC architecture with 120+ powerful instructions, most of which can be executed in a single clock cycle. It also includes a high-performance hardware multiplier for DSP-based systems and achieves close to 1 MIPS per MHz performance. The product offers up to 36 Kbytes of dynamically allocated instruction and data SRAM, as well as JTAG interface for extensive on-chip debugging support.

2322 615 4.. Vishay BCcomponents NTC Thermistors is a surface mount NTC thermistor produced by Vishay. Its features are high sensitivity, high accuracy, suitable for wave soldering and reflow soldering, and suitable for applications such as battery chargers, consumer equipment, and office equipment.