Industrial

80C528/83C528 is a 8-bit single-chip microcontroller manufactured by Philips Semiconductors using an advanced CMOS process and is a derivative of the 80C51 microcontroller family.

This document introduces the features and characteristics of the P6SMBJ series surface mount transient voltage suppressors, including peak voltage, peak power, and operating temperature range

The P6KE6.8A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These devices are ON Semiconductor's exclusive, cost-effective, highly reliable Surmetic� axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.

This document describes the features and characteristics of the P5KE series transient voltage suppressors, including unidirectional and bidirectional functionality, low inductance, and high temperature soldering.

The P4SMAJ series is a surface mount transient voltage suppressor with features including 400W peak pulse power dissipation, 5.0V-170V standoff voltage, availability in uni- and bi-directional versions, excellent clamping capability, and fast response time.

GS8320Z18/36T is a 36Mbit Synchronous Static SRAM. GSI's NBT SRAMs, like ZBT, NtRAM, NoBL or other pipelined read/double late write or flow through read/single late write SRAMs, allow utilization of all available bus bandwidth by eliminating the need to insert deselect cycles when the device is switched from read to write cycles. Because it is a synchronous device, address, data inputs, and read/ write control inputs are captured on the rising edge of the input clock. Burst order control (

GS832018/32/36T-250/225/200/166/150/133 is a high performance synchronous SRAM chip produced by GSI Technology. It supports 2.5V or 3.3V VDD voltage and 2.5V or 3.3V I/O voltage. It supports 100-Pin TQFP package.

This datasheet provides additional information for the GS816118/32/36D, including a new 165-bump BGA package and an x32 organization

SMAJ5.0 thru SMAJ170CA are surface mount TransZorb™ transient voltage suppressors. They are optimized for LAN protection applications, ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2), and ideal for EFT protection of data lines in accordance with IEC1000-4-4 (IEC801-4). The plastic package has Underwriters Laboratory Flammability Classification 94V-0. These devices have a glass passivated junction, excellent clamping capability, low incremental surge resistance, fast response time, and a peak pulse power capability of 300W with a 10/1000µs waveform.

SMAJ5.0A-TR,CA-TR SMAJ188A-TR,CA-TR series TRANSILTM® high performance protection diodes, with a maximum 400W peak pulse power (10/1000µs) and a blocking voltage range from 5V to 188V. This series has a low clamping factor and fast response time, suitable for a variety of applications, such as overvoltage protection of sensitive equipment.

This document is the technical specification of P4KE series TVS. The main features include: plastic package with UL certification; glass passivated chip construction; 400 watt surge capability at 1ms; excellent clamping capability; low zener impedance; fast response time

The MAX4820/MAX4821 8-channel relay drivers offer built-in kickback protection and drive +3.3V/+5V non- latching or dual-coil-latching relays. These devices are especially useful when driving +3V relays. Each inde- pendent open-drain output features a 2Ω on-resistance and is guaranteed to sink 70mA (min) of load current. Both devices consume less than 50µA (max) quiescent current and have 1µA output off-leakage current. The MAX4820 features an SPI™-/QSPI™-/MICROWIRE™- compatible serial interface. Input data is shifted into an 8- bit shift register and latched to the outputs when CS transitions from low to high. Each data bit in the shift reg- ister corresponds to a specific output, allowing indepen- dent control of all outputs. The MAX4821 features a 4-bit (A0, A1, A2, LVL) paral- lel-input interface. The first three bits (A0, A1, A2) deter- mine the output address, and the fourth bit (LVL) determines whether the selected output is switched on or off. Data is latched to the outputs when CS transi- tions from low to high. Both devices feature separate set and reset functions that allow the user to turn on or turn off all outputs simul- taneously with a single control line. Built-in hysteresis (Schmidt trigger) on all digital inputs allows this device to be used with slow rising and falling signals, such as those from optocouplers or RC power-up initialization circuits. The MAX4820/MAX4821 are available in 20-pin TSSOP and space-saving 20-pin thin QFN packag

The MAX4667/MAX4668/MAX4669 dual analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage cur- rent is only 5nA max at +85°C. These analog switches are ideal in low-distortion applications and are the pre- ferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, use less board space, and are more reliable than mechanical relays. The MAX4667 has two normally closed (NC) switches, the MAX4668 has two normally open (NO) switches, and the MAX4669 has one NC and one NO switch that guarantee break-before-make operation. These switches operate from a +4.5V to +36V single supply or from ±4.5V to ±20V dual supplies. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility when using ±15V sup- plies or a single +12V supply. Applications include reed relay replacement, PBX, PABX systems, test equipment, audio-signal routing, communication systems, and avionics.

The VI-200 Family Converters offer exceptional power density, efficiency, noise performance, reliability and ease of use.