Industrial

RAFIX 16, RAFIX 16 F, RAFIX 22 QR are a series of combination switches from Rossheim, including buttons, switches, buzzers, indicator lights, contactors, etc.

This product is a round connector with screw lock, conforming to DIN 45 321 standard, suitable for GPE application category (-40°C/+ 85°C/≤75% rF), made of PA 6.6 material, the contactor is CuZn, silver-plated and flash-gold-plated, 12-pole version is nickel-plated and 0.8µm gold-plated, the outer casing is zinc die-cast, copper-plated and nickel-plated, the ring nut is CuZn, nickel-plated. The insertion force/contact is <5 N, the pull force/contact is >1.2 N (measured with a polished steel pin, nominal size Ø 1.5 mm), the 12-pole version of the insertion force/contact is <5 N, the pull force/contact is >0.9 N (measured with a polished steel pin, nominal size Ø 1.0 mm), the connection method is welded connection.

This document is an introduction to LS 5360, LY 5360, LG 5360 5 mm (T1 ¾) LED. The product is GaAlP technology and has super-red, yellow, and green light colors. The light angle is 50° and the luminous efficiency is 1.5 lm/W (super-red, yellow), 2.5 lm/W (green).

This document describes the features and characteristics of LE CW E2B OSTAR® - Lighting with Optics (silicone) product. The product offers extremely high brightness and luminance due to pure surface emission and low thermal resistance. It has color coordinates of x = 0.42, y = 0.40 (warm white) and is available in various color temperatures. The product has a viewing angle of 130° and a light emitting surface of 2.1 mm x 2.1 mm. It utilizes ThinGaN technology and has a luminance of 12*106 cd/m² (4200 K) and an optical efficiency of 46 lm/W (350 mA, 4200 K). It can be mounted using screw holes and solder pads.

This product is a single-phase primary switch-mode power supply. The rated input voltage is 230 VAC and the rated output voltage is 24 Vdc. The maximum output current is 2.5A. The working temperature is 0 ° C to 40 ° C. The product is small in size, light in weight, efficient and safe.

This document describes the long-term performance characteristics of the iX�ra SL-2780 model, including voltage, capacity, current, and other parameters.

2047 is a re-connectable angle plug with earthing contact and 2nd earthing system, R2 type, produced by apsa

This is a table of 50 Schutzkt.-Tischsteckdosen DIN 49440 – 16 A/250 V~ wiederanschliessbar!

Apsa DIN 4944X_16 is a kind of protection contact plug.

The D6000S/n-3S is a re-connectable plug strip with a switch produced by APSA. It is suitable for DIN 49440, CEE7-III, (Schuko16/250~) with switch, head (switch code: 3S). The product has a quantity of 3, 6, 9, 12 sockets, with lengths of 262, 394, 526, 658 mm and EDV numbers of 4000993005538, 4000993005545, 4000993005552, and 4000993005569. The rated voltage, rated current, and protection class are respectively 250VAC, 16A, and IP20.

Screw terminal blocks for cables and wires for connection in switchboards.

The document describes a customizable power strip with various accessories and color options. The product is suitable for installation in cabinets or for general mobile applications.

17 surge protection power strips with housings made of impact-resistant plastic, halogen-free. Correct earthing is the basic requirement for effective surge protection. Normally, after the power strip is connected to the power supply, the green standby lamp at the power input must light up. This indicates that the 230 V surge protection is functioning. If the green light does not light up, it can be assumed that the power supply is without voltage or that the surge protection has functioned as intended! This will cause the sockets to no longer be supplied, but they will still be protected.