Industrial

PST 1,3/ 5-5,0 is a connector produced by PHOENIX CONTACT. It has a rated current of 12A, a rated voltage of 250V, a pin spacing of 5mm, 5 pins and a black color. It can be installed by soldering.

The KPT/KPSE connector series are ITT Cannon manufactured miniature circular connectors made to MIL-C-26482 standard, with three point bayonet coupling and five keyway polarization. They offer general purpose solder connectors and high performance crimp connectors. The broad product range provides the most complete family of connectors conform to MIL-C-26482, NFC 93422 HE 301 model, VG 95328 and LN 29500 specifications. The versatility of these connectors has been proven by their usage in general as well as in high performance environmental applications. In addition to the basic series presented in this catalogue, connectors for special applications are available. They include corrosion resistant types, filter connectors for electromagnetic compatability and non-outgasing, radiation resistant versions. All connectors conform to the above mentioned specifications.

SCHURTER FPPP-0011 1 BLOCK FILTERS is a standard and medical line filter from SCHURTER. It is PCB mounted and has a 1-stage standard attenuation. It can be used for PCB mounting or quick connect terminals.

This document describes the PC 5/ 2-G-7,62 product from PHOENIX CONTACT GmbH & Co. KG. The product is a 5-position header connector with a nominal current of 41A, nominal voltage of 500V, green color, and soldering assembly.

The MCVW 1,5/ 3-ST-3.5 plug component is made by Phoenix Contact and has a nominal current of 8 A, rated voltage of 160 V, pitch of 3.5 mm, position number of 3 and screw connection type.

The MCDN 1,5/ 6-G1-3,5 P26THR is a connector from PHOENIX CONTACT. It has an rated current of 8A, a rated voltage of 160V, a pin spacing of 3.5mm, a black color and a SMD/THT/THR assembly type.

BFQ245 is a PNP video transistor produced by Philips and is primarily intended for cascode output and buffer stages in high resolution color monitors.

IC 2,5/ 2-ST-5,08 is a plug component from PHOENIX CONTACT, with a nominal current of 12A, a rated voltage of 250V, a pitch of 5.08mm, 2 positions, a screw connection and a green color.

The LTC1090 is a data acquisition component which contains a serial I/O successive approximation A/D converter. It uses LTCMOS switched capacitor technology to perform either 10-bit unipolar, or 9-bit plus sign bipolar A/D conversions. It has 4 differential/8 single ended input channels that can be configured for either single ended or differential inputs. It also includes an on-chip sample and hold circuit. The serial I/O is compatible with industry standard full duplex serial interfaces. The output data can be programmed for a length of 8, 10, 12 or 16 bits, allowing easy interface to shift registers and a variety of processors. The LTC1090A is specified with total unadjusted error less than ±0.5LSB.

The EG 45-AE/ABS GN is a green electronic housing with 8 connection terminals.

The GMSTB 2,5/ 4-ST-7,62 is a plug component manufactured by PHOENIX CONTACT. It has a rated current of 12 A, a rated voltage of 400 V, a pitch of 7.62 mm, 4 terminals and a screw connection. The color is green.

MKDSN 2,5/ 2-5,08 is a terminal block produced by PHOENIX CONTACT. The nominal current is 16 A, the nominal voltage is 250 V, the terminal pitch is 5.08 mm, the mounting method is soldering, the conductor/PCB connection direction is 0 °, and the color is green.

This is the datasheet for the Lumberg JCBJ11 24 V DC power connector.

BDX54/A/B/C is a PNP silicon transistor produced by Fairchild Semiconductor International. Its maximum collector-emitter reverse voltage (VCEO) and maximum collector-emitter voltage (VCE) are respectively -100V and -80V, maximum collector-base reverse voltage (VCBO) is -100V, and maximum emitter-base voltage (VEBO) is -5V. The maximum DC collector current (IC) of the transistor is -8A, the maximum pulse collector current (ICP) is -12A, the maximum base current (IB) is -0.2A, the maximum collector power dissipation (PC) is 60W, and the junction temperature is 150 °C. The storage temperature is -65 to 150 °C.