Industrial

The NCV4279B is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.6 V at 150 mA. It features low quiescent current, drawing only 90 μA with a 100 μA load. This part is ideal for battery operated microprocessor equipment. The microprocessor control logic includes an active RESET (with DELAY) and a FLAG monitor, which provides an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts it down. The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or if the output voltage drops outside the regulation limits during normal operation. The reset threshold voltage can be adjusted by connecting an external resistor divider to the RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. It is suitable for use in automotive environments, as it can withstand load dump transients. The device has also been optimized for EMC conditions.

IDT54/74FCT374/534/574 are 8-bit registers with buffered common clock and buffered 3-state output control. When the output enable (OE) is LOW, the eight outputs are enabled. When the OE input is HIGH, the outputs are in the high-impedance state.

The 28LV64A is a 64K CMOS non-volatile electrically Erasable PROM from Microchip Technology Inc. It is organized as 8K words by 8 bits. The 28LV64A is accessed like a static RAM for the read or write cycles without the need of external components. During a “byte write”, the address and data are latched internally, freeing the microprocessor address and data bus for other operations. Fol- lowing the initiation of write cycle, the device will go to a busy state and automatically clear and write the latched data using an inter- nal control timer. To determine when the write operation has been completed, the user must periodically read the busy status bit. The device will automatically return to the ready state when the write operation is complete.

This data sheet introduces the Maxwell Technologies 28LV010 EEPROM's characteristics, including voltage, package, single dose, SEU, address access time, high endurance, page write mode, automatic programming, and low power dissipation.

ATF1516AS/L is a high density, high performance electrically erasable complex programmable logic device with 256 macrocells, 5 product terms per macrocell, expandable up to 40 per macrocell, 160, 192, 208 pins, 10 ns maximum pin-to-pin delay, registered operation up to 100 MHz, enhanced routing resources

The 3886 group is an 8-bit microcomputer based on the 740 family core technology. It is designed for controlling systems that require analog signal processing and includes two serial I/O functions, A-D converters, D-A converters, system data bus interface function, watchdog timer, and comparator circuit. The multi-master I2C bus interface can be added by option.

This range of very compact switching power supplies are designed for all applications, where high reliability and long lifetime are important. They provide excellent electric specifications and full compliance to the European EMC and Low Voltage Directive. Universal input and international safety approvals qualify these power supplies for worldwide use. With their low profile case and screw terminal block they are easy to install in any equipment.

This data sheet describes the principle, characteristics and application of µPB1005K. This IC is a double conversion RF block integrated RF/IF down-converter + PLL frequency synthesizer IC for GPS receiver. This IC uses 36-pin plastic QFN package, fixed prescaler and supply voltage. This IC is manufactured using NEC’s 20GHz fT NESAT TMIII silicon bipolar process. This process uses direct silicon nitride passivation film and gold electrodes. These materials can protect the chip surface from pollution, and prevent corrosion/migration. Thus, this IC realizes excellent performance, uniformity and reliability.

The ATW28XXD series is a high-reliability, high-density, and high-power DC/DC converter developed by IRF. It uses advanced analog hybrid technology and has an input range of 18 to 40 VDC, ±12V and ±15V output voltages, and can provide 30W output power. It has a fast loop response and excellent transient characteristics, and an operating temperature range of -55°C to +125°C. It also offers full military screening and an average failure-free time of 200,000 hours.

27C128 is a CMOS 128K bit (electrically) Programmable Read Only Mem- ory from Microchip Technology Inc., featuring high speed performance and low power consumption.

This document describes the features and characteristics of the 2211 series fixed DIP delay line from DATA DELAY DEVICES, INC. The product has high bandwidth, low profile, epoxy encapsulation, and meets or exceeds the MIL-D-23859C standard.

The 217 Series fast-acting fuse is available in ratings from 0.032 to 15 amperes and meets the IEC 60127-2 standard. RoHS and lead-free versions are available.

CTS 212 Rotary Switches are equipped with a hill and valley detent, a balanced double bump detent spring, excellent feel, 30˚ or 60˚ indexing options, spring return styles, adjustable stop options, solder lug and printed circuit terminals, a molded stator to prevent solder from flowing into the circuit, custom switching patterns, and separate index or wafer options.