Industrial

The M54/74HCT373 and M54/74HCT533 are high speed CMOS OCTAL LATCH WITH 3-STATE OUTPUTS fabricated with in silicon gate C2MOS technology. These ICs achive the high speed operation similar to equivalent LSTTL while maintaning the CMOS low power dissipation. These 8 bit D-Type latches are controlled by a latch enable input (LE) and a output enable input (OE). While the LE input is held at a high level, the Q outputs will follow the data input precisely or inversely. When the LE is taken low, the Q outputs will be latched precisely or inversely at the logic level of D input data. While the OE input is at low level, the eight outputs will be in a normal logic state (high or low logic level) and while high level the outpts will be in a high impedance state. The application designer has a choise of combination of inverting and non inverting.

This document is the specification of Spansion memory products now offered by both Advanced Micro Devices and Fujitsu. The document contains information about the products, including model, specification, performance, etc.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 11-21-06 M3A & MAH Series 8 pin DIP, 5.0 or 3.3 Volt, ACMOS/TTL, Clock Oscillators Pin Connections

The 3874 group is the 8-bit microcomputer based on the 740 family core technology. The 3874 group includes data link layer communication control circuit, A-D converters, D-A converter, automatic data transfer serial I/O, UART, and watchdog timer etc.

The 3823 group is the 8-bit microcomputer based on the 740 family core technology. The 3823 group has the LCD drive control circuit, an 8-channel A/ D converter, a serial interface, a watchdog timer, a ROM correc- tion function, and as additional functions. The various microcomputers in the 3823 group include variations of internal memory size and packaging. For details, refer to the section on part numbering.

The M37754M8C-XXXGP is a single-chip microcomputer designed with high-performance CMOS silicon gate technology. It has a CPU and a bus interface unit. The CPU is a 16-bit parallel processor that can also be switched to perform 8-bit parallel processing, and the bus interface unit enhances the memory access efficiency to execute instructions fast. In addition to the 7700 Family basic instructions, the M37754M8C- XXXGP has 6 special instructions which contain instructions for signed multiplication/division; these added instructions improve the servo arithmetic performance to control hard disk drives and so on. This microcomputer also include the ROM, RAM, multiple-function timers, motor control function, serial I/O, A-D converter, D-A con- verter, and so on.

M28W320ECT and M28W320ECB are 3V-supply 32Mbit (2Mb x16, Boot Block) Flash Memory. Main features include: supply voltage of VDD = 2.7V to 3.6V core power supply, VDDQ= 1.65V to 3.6V for input/output, VPP = 12V for fast programming (optional), access time of 70, 85, 90, 100ns, programming time of 10µs (typical), double-word programming option, quadruple-word programming option, common Flash interface, parameter blocks (top or bottom location), main blocks, all blocks locked at power-up, any combination of blocks can be locked, WP for block lock-down, 128-bit user programmable OTP cells, 64-bit unique device identifier, automatic standby mode, programming and erase suspend, 100,000 program/erase cycles/block, electronic signature (manufacturer code: 20h, top device code, M28W320ECT: 88BAh, bottom device code, M28W320ECB: 88BBh) etc.

M29F040B is a 4 Mbit (512Kb x 8, Uniform Block) single supply flash memory chip. It has a single 5V ± 10% power supply voltage, fast read/write operation time, 8 uniform 64 Kbytes storage blocks, supported program/erase controller, supported erase suspend/resume mode, low power consumption and 100,000 program/erase cycles.

M29F400BT M29F400BB is a single supply 4Mbit flash memory that can be programmed, erased and read at 5V±10%.

The M29F032D 32 Mbit 5V Supply Flash Memory features a supply voltage of VCC = 5V ±10%, a read/write time of 70 ns, a programming time of 10µs per byte, 64 uniform 64Kbyte memory blocks, support for erase suspend and resume modes, unlock bypass program commands, temporary block unprotection mode, a common flash interface, a 64-bit security code, low power consumption, automatic standby, and 100,000 program/erase cycles per block

The document is the M29W400T/B datasheet, which introduces the features and characteristics of the product, including the power supply voltage, access time, programming time, storage blocks, etc.

This document describes the features and characteristics of MITSUBISHI ELECTRIC SDRAM, including the organization structure, operating voltage, clock frequency, access time, etc. of each model. These products are suitable for main memory or graphic memory in computer systems.

The M35102 is a 13.56MHz, 2048-bit high endurance EEPROM contactless memory chip that complies with the ISO 14443-2 Type-B standard. It features 1792-bit EEPROM, 256-bit ROM, 64-bit unique serial ID, and supports BYTE and PAGE read/write, with self-timed programming cycle, auto-erase function, and 100,000 erase/write cycles, 40 years data retention.

This document describes the features and characteristics of the M28C64 model, a 64 Kbit (8K x 8) parallel EEPROM with software data protection. It includes fast access time, single supply voltage, low power consumption, fast byte and page write capabilities, enhanced write detection and monitoring, and software data protection.

M27W201 2 Mbit (256Kb x 8) Low Voltage UV EPROM and OTP EPROM is a low voltage EPROM launched by Philips. It is suitable for microprocessor systems that require large data or program storage. It is organized as 262,144 x 8 bits, with a working voltage of 2.7V and a working temperature range of -40 to 85°C.