Industrial

The Envisium Power PLCC-4 SMT LED is an extension of Agilent’s PLCC-4 SMT LEDs. The package can be driven at high current and has outstanding optical efficiency and super wide viewing angle. This data sheet provides detailed specifications and applications for this product.

The ASM5P2309A / ASM5P2305A 3.3V Zero Delay Buffer is a high performance clock buffer used to distribute high speed clocks on CPU and PCI busses. It has zero input - output propagation delay, multiple low-jitter outputs and less than 250ps output - output jitter.

This document describes the ASFL2 standard specifications and options, including applications, product features, and parameters.

AS7C4096A 5.0V 512K × 8 CMOS SRAM is a high performance, low power, high reliability SRAM product launched by Alliance Semiconductor. The product has center power and ground pins, standby mode, low power and high speed.

This document describes the features and characteristics of the Alliance Semiconductor AS7C34096A 3.3V 512K × 8 CMOS SRAM product, including industrial and commercial temperature range, high-speed access time, low power consumption, and easy memory expansion.

AS7C1026/AS7C31026 are 5V/3.3V 64K×16 CMOS SRAM with 65,536 words x 16 bits storage capacity. CE, OE inputs are supported for memory expansion. High clock frequency and low power consumption are its main features.

AS7C31024B 3.3V 128K X 8 CMOS SRAM is a SRAM storage device produced by Alliance Semiconductor. It has industrial and commercial temperature range, 131,072 words x 8 bits organization, 10/12/15/20 ns address access time, 5, 6, 7, 8 ns output enable access time, 252 mW / max @ 10 ns ACTIVE power consumption, 18 mW / max STANDBY power consumption, 6T 0.18u CMOS process, TTL/LVTTL-compatible, three-state I/O, 32-pin JEDEC standard package and other features

AS7C1025B 5V 128K X 8 CMOS SRAM (Center power and ground) is a CMOS SRAM produced by Alliance Semiconductor. It is designed for industrial and commercial temperatures, has an organization of 131,072 x 8 bits, high speed, and low power consumption.

ARF340 is a fast recovery diode produced by Ansaldo Trasporti s.p.a. Unita' Semiconduttori. Its repetitive peak reverse voltage is 2600 V, average forward current is 775 A, and surge current is 6.4 kA.

APL78L05/12 is a three-terminal low current positive voltage regulator launched by ANPEC. It has a maximum input voltage of 30V, output voltages of 5V/12V, an output current of 100mA, no external components, and internal thermal overload protection and short-circuit limiting functions.

The APL5523 is a dual low dropout regulator with output1 with 3.3V/0.5A and output2 with 1.8V/0.3A output capability. It is optimized for lower dropout voltage and faster transient response, making it ideal for low voltage applications. The regulator comes in a SOP-8 and SOP-8-P package.

APL431 is a precision adjustable voltage reference chip launched by ANPEC. Its precise reference voltage is 2.500V, which guarantees 0.5%, 1% or 2% accuracy. It supports 1mA to 100mA input current, the output voltage is adjustable between Vref to 20V, and it has a typical output impedance of 0.1Ω. There are SOT-23, SOT-23-5, SOT-89, SO-8, TO-92 and TO-92S packages to choose from. It can be widely used in linear regulators, adjustable power supplies, and switching power supplies.

APE1117 is a low dropout positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. APE1117 is also well suited for other applications such as VGA cards. APE1117 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply.

The APA2822 is a low-voltage dual-channel power amplifier designed for use in portable cassette players, active speakers, and radios. It features a wide supply voltage range, low crossover distortion, low quiescent current, support for bridge-tied or single-ended configurations, and both DIP-8 and SOP-8 packages.

The AP4301 is a monolithic IC specifically designed to control the output current and voltage levels of switch mode battery chargers and power supplies. The device contains two operational amplifiers and a precision shunt regulator. OPAMP 1 is designed for voltage control, whose non-inverting input internally connects to the ouput of the shunt regulator. OPAMP 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corre- sponding reduction in system complexity and cost.