Industrial

This document introduces the features and characteristics of the DF22 Series 2004.5 7.92 mm contact pitch, high-current connectors, including maximum current, reliable interior locking function, prevention of incorrect connections, molded-in contact retention tabs, prevention of incorrect board placement, support for encapsulation, prevention of short circuits between adjacent contacts, increased retention force of crimped contacts, and confirmation of complete contact insertion.

This manual introduces the use of Agilent Technologies Agilent 3200P pH Meter pH meter

This document is the user guide for Agilent Technologies Agilent 3200SA Stirrer, providing instructions on how to use the product and important notices.

The DCV01 series is a family of 1W, 1500Vrms isolated, unregulated, isolated DC/DC converters. The series products feature high power density (40W/in3), high reliability, high isolation and small size, making them suitable for a wide range of applications such as industrial control and instrumentation, data acquisition, test equipment, secondary isolation circuits.

The D2587P Laser Module is a high-power module with wavelength selection and locking capabilities, designed for use with external lithium niobate modulators, particularly in high-power (20 mW) applications. It features a high-performance multiquantum-well (MQW) distributed-feedback (DFB) laser, offered on 50 GHz ITU grid wavelengths ranging from 1528.77 nm to 1610.06 nm. The module includes a polarization-maintaining fiber pigtail for use with lithium niobate modulators. It provides high optical power (20 mW, CW) and comes in a hermetic 14-pin package.

This data sheet introduces the features of D2570, D2526, D2555 wavelength-selected direct modulated isolated DFB laser modules

The 32K x 8 Reprogrammable Registered PROM CY7C277 is a product of Cypress Semiconductor Corporation. It has the following features: Windowed for reprogrammability, CMOS for optimum speed/power, High speed, Low power, Programmable address latch enable input, Programmable synchronous or asynchronous output enable, On-chip edge-triggered output registers, EPROM technology, 100% programmable, Slim 300-mil, 28-pin plastic or hermetic DIP, 5V ±10% VCC, commercial and military, TTL-compatible I/O, Direct replacement for bipolar PROMs, Capable of withstanding greater than 2001V static discharge

The CY7C1366B/CY7C1367B 9-Mb (256K x 36/512K x 18) Pipelined DCD Sync SRAM is a high-performance synchronous SRAM chip from Cypress Semiconductor Corporation. It supports a high data transfer rate of 225 MHz and provides multiple packaging options, including JEDEC-standard 100-pin TQFP, 119-ball BGA and 165-Ball fBGA, to meet the needs of different application scenarios.

CY7C1041 is a high-performance CMOS static RAM organized as 262,144 words by 16 bits. It features high speed, low power consumption, and easy memory expansion.

The CY7C1021BV is a high-performance CMOS static RAM organized as 65,536 words by 16 bits. This device has an automatic power-down feature that significantly reduces power consumption when deselected. Writing to the device is accomplished by taking Chip Enable (CE) and Write Enable (WE) inputs LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O1 through I/O8), is written into the location specified on the address pins (A0 through A15). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O9 through I/O16) is written into the location specified on the address pins (A0 through A15). Reading from the device is accomplished by taking Chip Enable (CE) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location specified by the address pins will appear on I/O1 to I/O8. If Byte High Enable (BHE)

This document introduces the features and characteristics of CY7C09349AV and CY7C09359AV two 3.3V 4K/8K x 18 Synchronous Dual-Port Static RAMs

The I9121 Ammonia Combination ISE can measure ammonia and ammonium concentration in aqueous solutions.

The Agilent Technologies Agilent P3111 pH electrode can measure pH values. It is used with the 3200P meter or similar meters, with the R8111 or similar reference electrode.

The Agilent Technologies Agilent P3211 and P3311 pH Combination Electrodes are used to measure pH in aqueous solutions. The refillable reference electrode helps to prolong the service life of the electrode. They are used with the 3200P pH Meter or similar meters. The P3211 consists of a pH-sensing electrode and reference electrode. The P3311 consists of a pH-sensing electrode, reference electrode, and temperature-sensing probe.