Industrial

The XR-2206 is a monolithic function generator integrated circuit capable of producing high quality sine, square, triangle, ramp, and pulse waveforms of high-stability and accuracy. The output waveforms can be both amplitude and frequency modulated by an external voltage. Frequency of operation can be selected externally over a range of 0.01Hz to more than 1MHz. The circuit is ideally suited for communications, instrumentation, and function generator applications requiring sinusoidal tone, AM, FM, or FSK generation. It has a typical drift specification of 20ppm/°C.

This document introduces the features and characteristics of a certain brand and model product. The product adopts advanced design and has high performance. It is the leader in the market of similar products.

ST62T08C/T09C/ST62T10C/T20C/E20C 8-bit OTP/EPROM MCUs WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 20 PINS

XN01601 is a composite transistor from Toshiba. It consists of a silicon PNP epitaxial planer transistor (Tr1) and a silicon NPN epitaxial planer transistor (Tr2). XN01601 has two elements incorporated into one package (emitter-coupled transistors), which reduces the mounting area and assembly cost by half.

MID-54419 is a photo diode produced by Unity Opto Technology Co., Ltd., which has high photo sensitivity, low junction capacitance, high cut-off frequency, fast switching time and 40° acceptance angle.

The MIC5256 is an efficient, precise CMOS voltage regulator. It offers better than 1% initial accuracy, extremely low-dropout voltage (typically 135mV at 150mA) and low ground current (typically 90µA) over load. The MIC5256 features an error flag that indicates an output fault condition such as overcurrent, thermal shutdown and dropout. Designed specifically for handheld and battery-powered devices, the MIC5256 provides a TTL-logic-compatible enable pin. When disabled, power consumption drops nearly to zero. The MIC5256 also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in hand-held wireless devices. Key features include current limit, thermal shutdown, faster transient response, and an active clamp to speed up device turnoff. Available in the IttyBitty™ SOT-23-5 package and the new Thin SOT-23-5, which offers the same footprint as the standard IttyBitty™ SOT-23-5, but only 1mm tall. The MIC5256 offers a range of output voltages.

The LC372100PP, LC372100PM and LC372100PT are 262,144-word × 8-bit organization (2,097,152-bit) mask programmable read only memories. The LC372100PP-10, LC372100PM-10 and LC372100PT-10 feature an access time of 100 ns, an OE access time of 40 ns, and a standby current of 30 µA, and are optimal for use in 5-V systems that require high-speed access. The LC372100PP-20LV, LC372100PM-20LV and LC372100PT-20LV feature an access time of 200 ns, an OE access time of 80 ns, and a standby current of 4 µA, and thus are optimal for use in 3-V systems that use batteries. Additionally, they provide high-speed access in 3.3-V systems (3.0 to 3.6 V) with a 150-ns access time and a 60-ns OE access time. These ROMs adopt the JEDEC standard pin assignment which allows them to replace EPROM easily. To prevent bus line collisions in multi-bus microcontroller systems, pin 24 can be mask programmed to be either active high or active low.

This is a 8/16-bit data bus flash memory card produced by Mitsubishi Electric. It uses 8-megabit or 16-megabit flash electrically erasable and programmable read only memory ICs as common memory and a 64-kilobit electrically erasable and programmable read only memory as attribute memory.

PN3640 / MMBT3640 PNP Switching Transistor is a PNP switching transistor produced by Fairchild Semiconductor Corporation, designed for high frequency saturation switching, with a maximum collector current of 100mA.

This document describes the features and characteristics of the CE SRF1020 to SRF1620 (single chip) Chenyi Electronics Schottky Barrier Rectifier, including reverse voltage range, forward current, plastic package with Underwriters Laboratory Flammability Classification 94V-0, metal silicon junction, overvoltage protection, low power loss, high efficiency, high current capability, low forward voltage drop, single rectifier construction, high surge capability, and applications in low voltage, high frequency inverters, free wheeling, and polarity protection.

The CAT5132 is a high voltage Digitally Programmable Potentiometer (DPP) integrated with EEPROM memory and control logic to operate in a similar manner as a mechanical potentiometer. The DPP consists of a series of resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper output with CMOS switches. A separate 7-bit control register (WCR) independently controls the wiper tap switches for reading or setting the wiper position. The CAT5132 provides 128 tap points selectable between 10kΩ, 50kΩ and 100kΩ resistance values.

The CAT5111 is a 100-position linear taper potentiometer with non-volatile NVRAM wiper storage, buffered wiper, low power CMOS technology, single supply operation, increment up/down serial interface, 10kΩ, 50kΩ, 100kΩ etc. resistance values, available in PDIP, SOIC, TSSOP and MSOP packages. It is suitable for automated product calibration, remote control adjustments, offset, gain and zero control, tamper-proof calibrations, contrast, brightness and volume controls, motor controls and feedback systems, programmable analog functions.

This document describes the features and characteristics of the KTC811U epitaxial planar NPN transistor, including super-mini mold package, temperature response, and high pairing property in hFE.

SR520 THRU SR5100 5.0 A Schottky Barrier Rectifiers are Schottky diodes used in power electronic devices. They have low voltage drop, high current capability, high reliability, and high surge current capability.