Industrial

The HYM 321160S/GS-60/-70 is a 4 M Byte DRAM module organized as 1 048 576 words by 32-bit in a 72-pin single-in-line

This document introduces a Zener voltage regulator that uses a convenient surface mount plastic SOD−123 package. The product has a rated power of 500mW, a wide range of reverse Zener voltages, and is suitable for high-density applications.

This product is a four-channel common anode transient voltage suppressor for ESD protection. It has four unidirectional configurations and high power output. This product has low leakage and high ESD rating.

IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by t

TMS320DM642 is a high-performance digital media processor from Texas Instruments. It has 2-, 1.67-, 1.39-ns instruction cycle time, 500-, 600-, 720-MHz clock rate, eight 32-bit instructions/cycle, 4000, 4800, 5760 MIPS, IEEE 802.3 compliant, fully software-compatible C64x™, 8 independent transmit (TX) channels and 1 receive (RX) channel, eight highly independent functional units, providing a glueless I/F to common video decoder and encoder devices, supports multiple resolutions/video standards, VCXO interpolated control port (VIC), supports audio/video synchronization, host port interface (HPI), 32-bit/66-MHz, 3.3-V peripheral component interconnect (PCI) bus, etc.

M27C2001 is a high speed 2 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for microprocessor systems requiring large pro- grams and is organised as 262,144 by 8 bits. The FDIP32W (window ceramic frit-seal package) and LCCC32W (leadless chip carrier package) have a transparent lids which allow the user to ex- pose the chip to ultraviolet light to erase the bit pat- tern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C2001 is offered in PDIP32, PLCC32 and TSOP32 (8 x 20 mm) packages.

The RXM-155 is an integrated fiber-optic receiver module, suitable for SONET OC-3, SDH STM-1, and other 155 Mb/s fiber-optic transmission applications. It features single +5V supply, PECL data outputs, loss of signal flag, wide operating temperature range, etc.

This document describes the features and characteristics of silicon planar power Zener diodes. These diodes have a standard Zener voltage tolerance of ±5% with the option for other tolerances. Additionally, these diodes are available in different package types such as Mini-MELF, DO-35, and SOD-123.

AM100/150 Thru AM1010/1510 is a single-phase bridge rectifier from COMCHIP. It has a rated voltage of 50-1000V and a rated current of 1.0-1.5A. It has reliable construction, low cost, and small and light features.

AIC809/AIC810 3-Pin Microprocessor Reset Circuits are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide applications with benefits of circuit reliability and low cost by eliminating external components. These devices perform as valid singles in applications with Vcc ranging from 6.0V down to 0.9V. The reset signal lasts for a minimum period of 140ms whenever VCC supply voltage falls below preset threshold. Both AIC809 and AIC810 were designed with a reset comparator to help identify invalid signals, which last less than 140ms. The only difference between them is that they have an active-low RESET output and active-high RESET output, respectively. Low supply current (1µA) makes AIC809/AIC810 ideal for applications requiring low power consumption, such as notebook computers, digital still cameras, PDAs, and critical microprocessor monitoring.

This document introduces the features of ADS7866, ADS7867 and ADS7868, three ADS7866 series 1.2-V, 12-/10-/8-BIT, 200-KSPS/100-KSPS, MICRO-POWER, MINIATURE ANALOG-TO-DIGITAL CONVERTER WITH SERIAL INTERFACE. These converters interface with micro-processors or DSPs through a high-speed SPI compatible serial interface. There are no pipeline delays, and the minimum conversion time is determined by the frequency of the serial clock input SCLK, while the maximum frequency is determined by the minimum sampling time.

This is a document about ADP3801/ADP3802, ADP3801/ADP3802 is a high frequency switch mode dual lithium ion battery charger manufactured by Analog Devices. The charger has high end of charge voltage accuracy, intelligent end of charge output signal pin, programmable cell number selection, on-chip 3.3V LDO regulator, programmable charge current with high side sense, soft start charge current, undervoltage lockout, drives external PMOS, 10% adjustable end of charge voltage and charges NiCad, NiMH batteries (with external controller).

The ADC12D040 is a low power monolithic CMOS analog-to-digital converter (ADC) from TI that can convert two analog input signals simultaneously with a maximum sampling rate of 40MSPS and an output accuracy of 10.9 effective bits.

This document is the function description file of ADAV801 audio codec. It introduces the features of the product, including analog-to-digital converter, digital-to-analog converter, sample rate converter, digital interface, clock generator, etc.