Industrial

The BZT03C is a silicon Z-diode and transient voltage suppressor with glass passivated junction and hermetically sealed package from Vishay Telefunken. It features glass passivated junction, hermetically sealed package and clamping time in picoseconds. The application of this diode is medium power voltage regulators and medium power transient suppression circuits.

The document describes the features and characteristics of the H7815_E series of three-terminal positive regulators. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each regulator includes internal current limiting, thermal shutdown, and safe operating area protection, making it essentially indestructible. With adequate heat sinking, they can deliver over 1A of output current. Although primarily designed as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.

BYP 35A05-6 BYP 35K05-6 series is a high temperature silicon rectifier diode produced by BI Technologies of Germany. The rated current is 35A and the rated reverse peak voltage is 50-600V. It is packaged in a metal press-fit case with UL94V-0 flame retardant grade and has an external dimension of 4x4x2.3mm.

This document describes the features and characteristics of the 10/100 BASE-T SINGLE PORT TRANSFORMER MODULES, including compatibility with multiple manufacturers, compliance with standards, and electrical specifications.

This document describes the features and characteristics of GT8 series high-pressure connectors, including anti-oxidation design, shape design to prevent erroneous insertion, escape holes design to prevent secondary soiling, higher surrounding wall design to prevent terminal bending, etc.

The MAX5921/MAX5939 hot-swap controllers allow a circuit card to be safely hot plugged into a live backplane. The MAX5921/MAX5939 operate from -20V to -80V and are well suited for -48V power systems. These devices are pin compatible with both the LT1640 and LT4250 and provide improved features over these devices. The MAX5921/MAX5939 provide a controlled turn-on to circuit cards preventing damage to board connectors, board components, and preventing glitches on the power-supply rail. The MAX5921/MAX5939 provide undervoltage, overvoltage, and overcurrent protection. These devices ensure that the input voltage is stable and within tolerance before applying power to the load. Both the MAX5921 and MAX5939 protect a system against overcurrent and short-circuit conditions by turning off the external MOSFET in the event of a fault condition. The MAX5921/MAX5939 protect against input voltage steps by limiting the load current to a safe level without turning off power to the load. The device features an open-drain power-good status output, PWRGD or PWRGD for enabling downstream converters (see Selector Guide). A built-in thermal shutdown feature is also included to protect the external MOSFET in case of overheating. The MAX5939 features a latched fault output. The MAX5921 contains built-in autoretry circuitry after a fault condition. The MAX5921/MAX5939 are available in an 8-pin SO package and operate in the extended -40°C to +85°C temperature range.

The GS8322Z18/36/72 is a 36Mbit synchronous static SRAM from GSI Technology. It has NBT (NoBusTurnAround, no bus turnaround) functionality, which can achieve zero delay read-write-read bus utilization and is fully compatible with both pipelined and flow through NtRAM, NoBL and ZBT SRAMs.

The GS832218/36/72 is a high-performance synchronous SRAM with a 2-bit burst address counter. Originally developed for Level 2 Cache applications supporting high-performance CPUs, the device now finds application in synchronous SRAM applications, ranging from DSP main store to networking chip set support. It has various features, such as user-configurable flow through or pipeline operation, single/dual cycle deselect selectable, IEEE 1149.1 JTAG-compatible Boundary Scan support, etc.

The MAX5251 combines four low-power, voltage-output, 10-bit digital-to-analog converters (DACs) and four precision output amplifiers in a space-saving, 20-pin package. It is ideal for industrial-process-control applications due to its configurable output amplifiers, remote sensing, and high output drive capacity. Other features include software shutdown, hardware shutdown lockout, an active-low reset, a user-programmable logic output, and a serial-data output. Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16-bit serial word loads data into each input/DAC register. The 3-wire serial interface is compatible with SPI™/QSPI™ and Microwire™. All logic inputs are TTL/CMOS-logic compatible.

The document describes the features and characteristics of Silicon Avalanche Diodes 254 w w w. l i t t e l f u s e . c o m 400W Surface Mount Transient Voltage Supressors SMAJ series.

The document describes the features and characteristics of the SMAJ series TRANSILTM diodes, including peak pulse power, standoff voltage range, unidirectional and bidirectional types, low clamping factor, and fast response time.

This document introduces the features and characteristics of the X brand Y model product. The product uses XXX technology and has XXXX advantages.

MAX492/MAX494/MAX495 Precision Operational Amplifiers are low-voltage single-supply, rail-to-rail input and output operational amplifiers ideal for portable equipment, battery-powered instruments, data acquisition and signal conditioning applications.