Industrial

The document is about the technical manual of RP901K. It introduces the features and characteristics of the product, including the working principle, usage method, precautions, etc.

ECOSTEP® - 23S 2-2 series motors, technical data sheet

The RP904 series are CMOS-based PWM/PFM step-down DC/DC converters with synchronous rectifier, low supply current and through mode. The DC/DC converter of the RP904X consists of an oscillator, a PWM/PFM control circuit, a reference voltage unit, an error amplifier, a soft-start circuit, protection circuits, a protection against miss operation under low voltage (UVLO), PWM-DC to DC converter or bypass switch alternative circuit, a chip enable circuit, and a driver transistor. A high efficiency step-down DC/DC converter can be easily composed of this IC with only a few kinds of external components, or an inductor and capacitors. The output voltage of the DC/DC converter has two kinds of output voltage, and alternative with the VSEL pin. The RP904 series are PWM/PFM step-down DC/DC converter, thus, when the load current is small, the operation can be switching into the PFM operation from PWM control if the user chooses the VFM mode. As protection circuits, the current limit circuit which limits peak current of Lx at each clock cycle, and the latch type protection circuit which works if the term of the over-current condition keeps on a certain time in PWM mode. Latch-type protection circuit works to latch an internal driver with keeping it disable. To release the protection, after disable this IC with a chip enable circuit, enable it again, or restart this IC with p-MOSFET.

The low profile load cell type 142 can be used in small, medium and high loading capacity weighing systems.- Some applications are: Weighing in hoppers, tanks, silos, etc.- Weighing platforms- MAIN FEATURES: Water-proof - Side load high resistance - Stainless steel - Available with double bridge output (for redundant system) - Available with output (CIA 404) - Available with analog output 4-20mA - Soldered with microplasma - Standard nominal load from 500 to 150.000 kg - High precision (equivalent to OIML C3)

The RP904Z Series are CMOS-based step-down DC/DC converters with Synchronous Rectifier featuring 1A∗∗ output current and have through mode. RP904Z includes an under-voltage lockout circuit (UVLO), a soft start circuit and a timer latch protection circuit. By simply using an inductor and capacitors as external components, a high-efficiency step-down DC/DC converter can be easily configured. The output voltage of DC/DC converter can be selected from 2 voltage by inputting signal to VSEL pin. The DC/DC converter is PWM/VFM manual switching control. RP904Z is able to select DC/DC mode or through mode by inputting signal to BYPASS pin. WLCSP-11-P2 package is available.

This document describes the features and characteristics of the Gummi-Kompensator AS-1 universal compensator. The product is designed to reduce thermal and mechanical stresses in pipelines and system components such as pumps, compressors, and motors. It provides vibration and noise damping, accommodates axial, lateral, and angular movements, compensates for installation inaccuracies, and complies with fire protection regulations. It is commonly used in shipbuilding and heating systems.

This document introduces a three-phase Funk-Entstörfilter product called HLD 110-500/75. The product features a single-stage filter design, providing efficient filtering against line-conducted emissions. It offers the advantage of increased immunity for connected devices and can be used for the net-side interference suppression of individual devices, frequency inverters, or as a collective interference suppressor.

PFXGP4501TAD is Mitsubishi Electric's GP-4501T series industrial touch screen product

The OP9 series is a 5-digit indicator to adjust and to read directly a motion or an angle, obtained by a drive shaft rotation.

The R5400N Series are high input voltage CMOS-based protection ICs for over-charge/discharge of rechargeable one-cell Lithium-ion (Li-ion) / Lithium polymer excess load current, further include a short circuit protector for preventing large external short circuit current and excess discharge-current. Each of these ICs is composed of three voltage detectors, reference units, a delay circuit, a short circuit detector, an oscillator, a counter, and a logic circuit. SOT-23-5 package is available.

The R5402Nx Series is a high input voltage CMOS-based protection ICs for over-charge/discharge of rechargeable one-cell Lithium-ion (Li-ion) / Lithium polymer excess load current, further include a short circuit protector for preventing large external short circuit current and excess charge/discharge-current. Each of these ICs is composed of four voltage detectors, reference units, a delay circuit, a short circuit protector, an oscillator, a counter, and a logic circuit. SOT-23-5 package is available.