Industrial

The MAX105 is a high-performance analog-to-digital converter (ADC) from Texas Instruments. It uses a 6-bit dual-channel design and supports an 800Msps sampling rate, achieving a typical signal-to-noise ratio (SNR) of 37dB with an input frequency of 200MHz, and an integral nonlinearity (INL) and differential nonlinearity (DNL) of ±0.25 LSB. The MAX105 also provides LVDS digital outputs with an internal 6:12 demultiplexer, which can reduce the output data rate by half. In addition, the MAX105's typical power consumption is 2.6W and its operating temperature range is -40°C to +85°C.

The document introduces the features of the MAX104/MAX106/MAX108 evaluation kits, including 50Ω Clock and Analog Inputs Through SMA Coaxial Connectors, ±250mV Input Signal Range, Demultiplexed Differential PECL Outputs, etc.

The document describes the features and characteristics of a product, but further analysis is needed to provide specific details.

The document describes the features and characteristics of the PT Compact and PT Compact plus resistance thermometers, which are designed for temperature measurement in processes with medium and low pressures. The temperature measurement ranges from -200°C to +600°C, covering the majority of temperature measuring tasks. The thermometers are available with platinum sensors PT100 or PT1000 in 2-, 3-, 4- or 2x2-wire circuit. If the measuring signal needs to be transmitted over longer distances, the PT Compact plus is available with an integrated transmitter. This transmitter converts the resistance of the platinum sensor into a linear temperature signal 4-20 mA or 0-10 V. Different process connections and adjustable compression fittings highlight the variability of this measuring instrument. A version with a tapered stem is also available for fast reaction times. The electrical connection is realized with an L-plug according to DIN EN 175301-803A. An M12x1 connection is optionally available. All thermometer parts in contact with the process medium are made of stainless steel. The housing and the replaceable measuring insert are bolted together by a knurled nut, allowing for the exchange of the measuring insert without removing the thermometer from the process. It is even possible to upgrade from PT Compact to PT Compact plus or to TC400, a compact RTD with LED display and switching output, without opening the process connection.

The MAX1061/MAX1063 are low-power, 10-bit analog-to-digital converters (ADCs) that feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. They operate with a single +3V analog supply and feature a VLOGIC pin that allows them to interface directly with a +1.8V to +3.6V digital supply. Power consumption is only 5.7mW (VDD = VLOGIC) at the maximum sampling rate of 250ksps. Two software-selectable power-down modes enable the MAX1061/MAX1063 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1061 has eight input channels and the MAX1063 has four input channels (four and two input channels, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements. The MAX1061 is available in a 28-pin QSOP package, while the MAX1063 is available in a 24-pin QSOP. For pin-compatible +5V, 10-bit versions, refer to the MAX1060/MAX1062.

GR-SAE series expansion joints are composed of elastic rubber and metal support. It has the advantages of good elasticity, excellent recovery performance, convenient installation, reliable sealing, etc. It is mainly used to absorb thermal stresses and mechanical stresses caused by temperature changes in piping systems, and prevent pipeline rupture and leakage of pipeline medium due to excessive expansion or contraction. This series of expansion joints are widely used in piping systems in petrochemical, chemical, metallurgical, electric power, transportation, construction and other industries.

The MAX1040-MAX1049 is an integrated multichannel 10-bit analog-to-digital converter (ADC) and a quad, 10-bit digital-to-analog converter (DAC) in a single IC. The device also includes a temperature sensor and configurable general-purpose I/O ports (GPIOs) with a 25MHz SPI™-/QSPI™-/MICROWIRE™-compatible serial interface. The ADC is available in a 4 or an 8 input-channel version. The four DAC outputs settle within 2.0µs, and the ADC has a 300ksps conversion rate. All devices include an internal reference (2.5V or 4.096V) providing a well-regulated, low-noise reference for both the ADC and DAC. Programmable reference modes for the ADC and DAC allow the use of an internal reference, an external reference, or a combination of both. Features such as an internal ±1°C accurate temperature sensor, FIFO, scan modes, programmable internal or external clock modes, data averaging, and AutoShutdown™ allow users to minimize both power consumption and processor requirements. The low glitch energy (4nV•s) and low digital feedthrough (0.5nV•s) of the integrated quad DACs make these devices ideal for digital control of fast- response closed-loop systems. The devices are guaranteed to operate with a supply volt- age from +2.7V to +3.6V (MAX1041/MAX1043/MAX1047/ MAX1049) and from +4.75V to +5.25V (MAX1040/ MAX1042/MAX1046/MAX1048). These devices consume 2.5mA at 300ksps throughput, only 22µA at 1ksps throughput, and under 0.2µA in the shutdown mode.

This document provides technical data of UNIVEX Heat Exchanger System, including dimensions, weight, operating pressure, etc. The system is suitable for cooling oil, non-flammable liquid, emulsion, or water/glycol through industrial, marine, river, or brackish water.

This document describes the 2/2-way valves ON 8 to ON 25, which are electromagnetic diaphragm valves with DVGW approval, suitable for neutral gas and liquid fuels. They have internal threaded connections G1/4 to G1 and operate at pressures of 0 to 4/8 bar. The valves offer high functionality and short response time.

The VHZ-.GA/GK is a gear flow meter produced by the German Volutron company. It is suitable for measuring viscous, liquid, self-lubricating media.

The document describes the features and characteristics of a certain brand and model of product.

This document introduces the 90 series sockets and accessories, including various types of sockets such as box clamp sockets, plate clamp sockets, PCB sockets, etc., as well as their usage instructions.