Industrial

The IR2125 is a high voltage, high speed power MOSFET and IGBT driver with over-current limiting protection circuitry. It features a floating channel designed for bootstrap operation and is fully operational up to +500V. It is also tolerant to negative transient voltage and dV/dt immune. The driver has a gate drive supply range from 12 to 18V, undervoltage lockout, and a current detection and limiting loop to limit the driven power transistor current. An error lead indicates fault conditions and programs shutdown time. The output is in phase with the input.

The IR2121 is a high speed power MOSFET and IGBT driver with over-current limiting protection cir- cuitry.

IR2117/IR2118(S) is a high voltage, high speed power MOSFET and IGBT driver. It features a floating channel designed for bootstrap operation, fully operational to +600V, tolerant to negative transient voltage, and immune to dV/dt. It has a gate drive supply range from 10 to 20V, undervoltage lockout, CMOS Schmitt-triggered inputs with pull-down, and output in phase with input (IR2117) or out of phase with input (IR2118).

The IR2118 is a high voltage, high speed power MOSFET and IGBT driver. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS outputs. The output driver features a high pulse current buffer stage designed for minimum cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high or low side configuration which operates up to 600 volts.

IR2117/IR2118(S) is a high voltage, high speed power MOSFET and IGBT driver with features such as floating channel, wide gate drive supply range, and undervoltage lockout.

The IR2117 is a high voltage, high speed power MOSFET and IGBT driver. Proprietary HVIC and latch immune CMOS technologies enable rugged monolithic construction. The logic input is compatible with standard CMOS outputs. The output driver features a high pulse current buffer stage designed for minimum cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high or low side configuration which operates up to 600 volts.

IR2114/21141/2214/IR22141 half-bridge gate driver IC is a high performance, high reliability 1200V isolated 600V gate driver in 8-pin SOT-223 package. The driver has floating channel, soft over-current shutdown, synchronization shutdown, integrated desaturation detection circuit, two stage turn on output for di/dt control, separate pull-up/pull-down output drive pins, matched delay outputs and under voltage lockout with hysteresis band.

The IR2113L6 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels.

The document describes the features and characteristics of the IR2113E6 high voltage, high speed power MOSFET and IGBT driver, including floating channel design, gate drive supply range from 10 to 20V, logic and power ground with ±5V offset, CMOS Schmitt-triggered inputs, etc.

The IR2110/IR2113 are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable rugge- dized monolithic construction. Logic inputs are com- patible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse cur- rent buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 volts.

This document describes the installation steps for the Flo‑Torq Reflex drive hub, including assembling the drive sleeve onto the propeller and using a thrust washer to ensure proper seating.

The document is a manual of Unvented Room Heater products, which introduce the features and characteristics of the products, as well as the usage methods.

This document is an installation and operation manual that describes the installation and operation methods of vented models such as 26-GBVLP, 26-GBVNG, 60-SHBVLP, 60-SHBVNG, and 60-TRBVNG. The stove requires a 4-inch B-VENT gas pipe with one inch clearance to combustibles. It is not approved for mobile home or doublewide installation and should not be installed in a bedroom. It is important to read the manual, consult a qualified installer or gas company before installation. The document also provides precautionary statements for users if they smell gas and highly recommends the use of smoke detectors and carbon monoxide detectors.

This manual introduces the installation and operation methods of 25-PAF, 55-SHP25 and 55-TRP25. This equipment is an auxiliary furnace that can be used to supplement existing systems. It is not designed to heat a home from a cold start. Please read this manual carefully before installation and use.

This document describes the features of the Duo steam trap BK212 series products from FLOWSERVE GESTRA. These traps have corrosion resistance, can withstand water hammer, and are equipped with an internal strainer and integral non-return valve. They can be installed in any position and provide automatic air-venting.