Industrial

ADT7518 is a temperature sensor, 4-channel ADC, and quad voltage output DAC with SPI/I2C compatible interface. It features four 8-bit DACs with buffered voltage output, guaranteed monotonicity over all codes. It also has a 10-bit temperature-to-digital converter and a 10-bit 4-channel ADC. The input range is 0V to 2.25V and the temperature range is -40°C to +120°C with a temperature sensor accuracy of ±0.5°C. The supply range is 2.7V to 5.5V and the DAC output range is 0V to 2VREF. It has a power-down current of 1µA. The ADT7518 has a SPI, I2C, QSPI, MICROWIRE, and DSP compatible 4-wire serial interface, as well as SMBus packet error checking (PEC) compatibility. It is suitable for portable battery-powered instruments.

AD7998/AD7997 Errata Sheet introduces that pin-out diagram of AD7998/AD7997 ADCs has changed. Please discard any pin-out information from AD7998/AD7997 data sheets up to and including Rev PrD.

ADE7751 is an energy metering IC with on-chip fault detection from Analog Devices. It can be used in two-wire distribution systems to detect two-wire current faults.

This document describes the features and characteristics of the AD9219 Quad, 10-Bit, 40/65 MSPS Serial LVDS 1.8 V ADC, including 4 ADCs integrated into 1 package, low power, excellent linearity, programmable clock and data alignment, etc.

This application note describes a high accuracy, low cost, single-phase power meter based on the ADE7757

This application note explains how to interface AD7676 ADCs in master serial mode to ADSP-21365 SHARC® processors. It also provides example code to demonstrate how the ADSP-21365 processor's Serial Port (SPORT) can be programmed to receive data from the AD7676 converter when the AD7676 is configured in master serial mode.

This application note explains how to interface AD7276 high-speed data converters to ADSP- 21262 SHARC® processors. This application note also provides example code to demonstrate how the SHARC processor's serial ports (SPI and SPORTs) can be programmed to receive data from AD7276 devices in core and DMA modes.

This document introduces how Blackfin® family processors can be integrated with a mixed-signal front-end (MxFE) for a variety of real-time applications.

AD9865/66 is a frequency synthesizer with SPI interface, supports 10Mhz-500Mhz frequency range. It can be configured with LabVIEW software.

This is an introduction document about ADT7301, it is a 13-bit digital temperature sensor with ±1°C accuracy and a working temperature range of -40°C to +150°C, the power consumption is 0.631 mW.

This application note describes how to modify the AD9430 evaluation board to use a crystal oscillator clock.

The AD2S44 is a low-cost, 14-bit, dual channel synchro/resolver-to-digital converter. It is designed specifically for applications where space, weight, and cost are at a premium. Each 32-lead hybrid device contains two independent Type II servo loop tracking converters.