Agilent manuals, page 56
Agilent LC/MS nano-Electrospray Ionization Source (nESI) Manual
This file introduces the advantages of Varian nano-Electrospray Ionization Source (nESI), which can be connected to all current Varian LC/MS systems. nESI can improve the ionization efficiency of the sample, make the droplets in the sample solution smaller, reduce the contribution of solvent to the background noise, and thus improve the sensitivity. nESI can also be combined with 75-micron diameter columns and nano-flow LC pumps to increase sample concentration and sensitivity. nESI is suitable for low sample volume applications such as proteomics research because it consumes less sample.
Agilent Seamless method transfer from the Agilent 1200 Series to the Agilent 1220 1260 Infinity LC systems Manual
The document describes the process of seamlessly transferring validated methods from the Agilent 1200 Series LC system to the Agilent 1220 and 1260 Infinity LC systems. The method used USP/NF 23 method and the system suitability test developed on an Agilent 1200 Series LC system was used to test whether the Agilent 1220 and Agilent 1260 Infinity LC systems met the acceptance criteria. The chromatographic conditions of the system suitability test transferred to the Agilent 1260 and Agilent 1220 Infinity LC systems without changes. The results obtained were consistent with the results typically obtained on the Agilent 1200 Series LC system.
Agilent PEG/PEO Standards Aqueous SEC Manual
Introduces the characteristics and advantages of Agilent PL aquagel-OH 50 8 μm column for the separation of water-soluble polymers.
Agilent PEG Standards Aqueous SEC Manual
This document provides a technical overview of Agilent PL aquagel-OH 40 8 µm columns, which are suitable for determining the molecular weight distributions of water-soluble polymers and for separating oligomers and small molecules. These columns have an extremely hydrophilic and neutral surface, allowing for high-performance analysis of analytes with neutral, ionic, and hydrophobic moieties. The PL aquagel-OH 40 8 µm high-performance columns are ideal for medium molecular weight separations, offering high pore volume and high column efficiency.
Agilent Characterizing a Polysaccharide by Aqueous SEC Manual
This document describes the features and characteristics of Agilent PL aquagel-OH 40 8 μm high performance columns, which are ideal for medium molecular weight separations of polysaccharides. They combine high pore volume and high column efficiency for maximum resolution.
Agilent High Resolution of Methyl Celluloses Manual
This document introduces the application of PL aquagel-OH 60 8 μm and PL aquagel-OH 40 8 μm high performance columns for relatively high molecular weight aqueous separations of methyl cellulose by size exclusion chromatography (SEC).
Agilent High Resolution of Hydroxyethyl Celluloses Manual
Agilent Wide Range MW Separation by Aqueous SEC Manual
This document introduces the Agilent PL aquagel-OH MIXED-H 8 μm columns, which provide high resolution (>35,000 plates/m) over a very wide range of molecular weights, simplifying column selection and providing a flexible analytical system. Due to the extremely hydrophilic nature of these columns, neutral polymers such as polyethylene glycol/oxide (PEG/PEO) can be run with pure water as the eluent, using size exclusion chromatography (SEC). Figure 1 shows a typical raw data chromatogram for a mixture of Agilent PEO/PEG standards. The broad molecular weight resolving range of the PL aquagel-OH MIXED-H 8 μm column is clearly evident.
Agilent PEG Separations by Aqueous SEC Manual
This document describes the features of Agilent PL aquagel-OH 30 8 μm high performance columns. The columns are highly hydrophilic and suitable for separations using water as the solvent. PL aquagel-OH columns are ideal for low molecular weight separations by size exclusion chromatography, offering high pore volume and high column efficiency.
Agilent Easy Calibration of OligoPore Columns (THF) Manual
This document introduces the features and characteristics of Agilent OligoPore Columns (THF), including column design, use methods, performance advantages, etc.
Agilent Easy Calibration of OligoPore Columns (DMF) Manual
This document introduces the simple calibration method of Agilent OligoPore Columns (DMF), using the integrated Agilent PL-GPC 220 GPC/SEC system, using Agilent polyethylene glycol (PEG) narrow standards at 80 °C
Agilent Easy Calibration of OligoPore Columns (PS PMMA) Manual
This document introduces the simple calibration method of Agilent OligoPore columns. OligoPore columns utilize an innovative medium that exhibits significantly increased pore volumes compared to conventional low pore size columns, resulting in higher resolution in the oligomeric region. OligoPore columns are specifically designed for the analysis and fingerprinting of oligomeric distributions. The composition of Agilent PMMA and PS molecular weight standards and how to characterize the low molecular weight region of OligoPore calibration through calibration are also described in this document.
Agilent Reduce Solvent Consumption with Narrow Bore Columns Manual
Agilent PLgel MiniMIX Columns Technical Overview, introduces the features of Agilent PLgel MiniMIX Columns, including high performance, excellent solvent compatibility and mechanical stability, as well as reduced solvent consumption, increased operator safety and reduced solvent disposal costs.
Agilent Sample Dispersion in GPC Columns Manual
This document is about Agilent PLgel MIXED Columns technical overview
Agilent Improving Analytical Quality in GPC by Changing Sample Concentration Manual
This document introduces the features and advantages of the Agilent PLgel MIXED-C columns, including a linear calibration range of up to 2 million MW, high resolution, rapid solvent exchange capability, excellent temperature stability, and high resolution. The advantage of choosing the appropriate sample concentration is demonstrated by analyzing a broad polystyrene sample.