STMicroelectronics Manuals - Page 62

ManualLib has 6,003 STMicroelectronics manuals, in categories such as Anti-Theft Devices, Electronic Original. Every file can be read online or downloaded as a PDF for free.

STMicroelectronics manuals, page 62

  • ST 74LCX86 handbook

    This document describes the features and characteristics of the 74LCX86 low voltage CMOS quad Exclusive OR gate with 5V tolerant inputs. It features high speed operation, power down protection on inputs and outputs, symmetrical output impedance, balanced propagation delays, and compatibility with 74 series 86. It is designed for low power and high speed 3.3V applications and can be used in a 5V signal environment.

  • ST 74LCX32 handbook

    The 74LCX32 is a low voltage CMOS quad 2-input OR gate with features such as 5V tolerant inputs, high speed, and low power consumption. It is ideal for low power and high speed 3.3V applications and can be interfaced to a 5V signal environment for inputs. The product is equipped with protection circuits against static discharge, providing 2KV ESD immunity and transient excess voltage protection. It is fabricated using sub-micron silicon gate and double-layer metal wiring C2MOS technology.

  • ST 74LCX14 handbook

    The 74LCX14 is a low voltage CMOS HEX SCHMITT inverter with 5V tolerant inputs.

  • ST 74LCX08 handbook

    This document describes a low voltage CMOS quad 2-input AND gate with features such as 5V tolerant inputs, high speed, power down protection, etc. It is suitable for low power and high speed 3.3V applications and can be interfaced to a 5V signal environment. The product has good ESD performance and transient excess voltage protection.

  • ST 74LCX04 handbook

    The 74LCX04 is a low voltage CMOS HEX inverter fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.

  • ST 74LCX02 handbook

    The 74LCX02 is a low voltage CMOS quad 2-input NOR gate fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for inputs. It has same speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

  • ST 74LCX00 handbook

  • ST 74LCX245 LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS handbook

    The document describes the features and characteristics of the 74LCX245 low voltage CMOS octal bus transceiver. It has 5V tolerant inputs and outputs, and is suitable for low power and high speed 3.3V applications. This product is intended for two-way asynchronous communication between data buses, with the direction of data transmission determined by the DIR input. The enable input G can be used to disable the device, effectively isolating the buses. All inputs and outputs are equipped with protection circuits against static discharge, providing 2KV ESD immunity and transient excess voltage protection. All floating bus terminals during the High Z state must be held HIGH or LOW.

  • ST HCF4541B PROGRAMMABLE TIMER handbook

    HCF4541B is a monolithic integrated circuit produced by Honeywell Corporation. It is mainly used as a timer and uses metal oxide semiconductor technology. It has two packaging forms: DIP and SOP. The device consists of a 16-stage binary counter, an oscillator controlled by two external resistors and a capacitor, an output control logic and an automatic power-on reset circuit. The counter can change at the positive edge clock transition and can be cleared by the MASTER RESET input. The output of this timer is the Q or Q output from the 8th, 13th, or 16th counter stage. The choice of the stage depends on the time.

  • ST HCF4030B QUAD EXCLUSIVE-OR GATE handbook

    HCF4030B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. It consists of four indipendent exclusive-OR gates integrated on a single monolithic silicon chip. Each exclusive-OR gate consists of four n-channel and four p-channel enhancement-type transistors. All inputs and outputs are protected against electrostatic effects.

  • ST HCF4014B SYNCHRONOUS PARALLEL OR SERIAL IN/SERIAL OUT 8 - STAGE STATIC SHIFT REGISTER handbook

    The HCF4014B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology. It is an 8-stage parallel or serial input/serial output register with master-slave flip-flops and output buffering. It operates at medium speed and is fully static. The device meets all requirements of JEDEC JESD13B standard.

  • ST 74LCX244 LOW VOLTAGE CMOS OCTAL BUS BUFFER (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS handbook

  • ST M22100 4x4 CROSSPOINT SWITCH WITH CONTROL MEMORY handbook

    The M22100 is a 4x4 crosspoint switch with built-in control latches and large analog signal capability. It can transmit signals up to 10 MHz and has matched switch characteristics, high linearity, and standard COS/MOS noise immunity.

  • ST M74HCU04 HEX INVERTER (SINGLE STATE) handbook

    M74HCU04 is a high speed CMOS Hex Invertor (Single State) fabricated with silicon gate C2MOS technology. As internal circuit is composed of a single stage inverter, it can be used in crystal oscillator. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

  • ST M74HCT74 DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR handbook

    M74HCT74 is a CMOS DUAL D TYPE FLIP FLOP WITH CLEAR, which has the characteristics of high speed, low power consumption, and compatibility with TTL. It is suitable for direct interface with HSC2MOS systems, TTL and NMOS components.