STMicroelectronics manuals, page 64
ST HCF4538B handbook
The HCF4538B is a monolithic integrated circuit that provides stable retriggerable/resettable one-shot operation for any fixed voltage timing application. It allows trigger and reset propagation delays independent of RX and CX, and can be triggered from leading or trailing edge. It has buffered Q and Q outputs, and offers a wide range of output pulse widths. It has low quiescent current and is rated for 5V, 10V, and 15V.
ST HCF4099B handbook
HCF4099B, an 8-bit addressable latch, is a serial-input, parallel output storage register that can perform a variety of functions.
ST HCF4098B handbook
The HCF4098B dual precision monostable multivibrator provides stable retriggerable/ resettable one-shot operation for any fixed voltage timing application. An external resistor (RX) and an external capacitor (CX) control the timing for the circuit. Adjustment of RX and CX provides a wide range of output pulse widths from the Q and Q terminals. The time delay from trigger input to output transition (trigger propagation delay) and the time delay from reset input to output transition (reset propagation delay) and the time delay from reset input to output transition (reset propagation delay) are independent of RX and CX. Leading edge triggering (+TR) and trailing edge triggering (-TR) inputs are provided for triggering from either edge of an input pulse. An unused +TR input should be tied to VSS. An unused -TR input should be connected to VCC.
ST HCF4094B handbook
HCF4094B is one of the products in the HCF4094 series. HCF4094 series products are a 8-bit serial shift register with standardized symmetrical output characteristics and a maximum operating speed of 5MHz.
ST HCF4093 handbook
HCF4093 is a quad 2-input NAND schmitt trigger that features internal schmitt trigger action without the need for external components. Its characteristics include: 0.9V hysteresis voltage, noise immunity greater than 50% of VDD, no limit on input rise and fall times, quiescent current specified up to 20V, standardized symmetrical output characteristics, and parametric ratings of 5V, 10V, and 15V.
ST HCF4070 handbook
HCF4070 is a quad exclusive OR gate integrated circuit produced by STMicroelectronics. It is available in DIP14 and SO14 packages with a working voltage range of 5V to 15V. It features medium speed and low static current, and can be widely used in automotive, industrial, computer and other fields.
ST HCF4067B handbook
HCF4067B is a digitally controlled analog switches device with low ON impedance, low OFF leakage current, and internal address decoding. It is a 16-channel multiplexer with four binary control inputs and an inhibit input, allowing the selection of any combination of inputs to choose one switch.
ST HCF4066B handbook
The HCF4066B is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with HCF4016B, but exhibits a much lower ON resistance. In addition, the ON resistance is relatively constant over the full input signal range. The HCF4066B features a very high switching efficiency and extremely fast switching times.
ST HCF4060B handbook
The HCF4060B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages.
ST HCF4051B handbook
The HCF4051B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology. It is an analog multiplexer/demultiplexer with low ON impedance and very low OFF leakage current. The circuit dissipates extremely low quiescent power over the full supply voltage range, independent of the logic state of the control signals. When a logic '1' is present at the inhibit input terminal, all channels are off.
ST HCF4047B handbook
This document describes the features and characteristics of the HCF4047B integrated circuit, including low power consumption, special CMOS oscillator configuration, monostable or astable operation, true and complemented buffered outputs, etc.
ST HCF4042B handbook
The HCF4042B is a high-performance, low-power four-channel D-latch with common clock and polarity control input. The device is available in DIP and SOP packages, and is suitable for use in various automatic test equipment and automatic control systems.
ST HCF4024B handbook
HCF4024B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4024B is a ripple carry binary counter. All counter stages are master-slave flip-flops. The state of a counter advances one count on the negative transition of each input pulse; a high level on the RESET line resets the counter to its all zeros stage. Schmitt trigger action on the input pulse line permits unlimited clock rise and fall times. All inputs and outputs are buffered.
ST HCF4019B handbook
The HCF4019B is a HCF4019B series quad AND/OR select gate consisting of four AND/OR select gates, each consisting of two 2-input AND gates driving a single 2-input OR gate. Selection is accomplished by control bits Ka and Kb. In addition to selection of either channel A or channel B information, the control bits can be applied simultaneously to accomplish the logical A+B function.
ST HCF4017B handbook
The HCF4017B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology. It features medium speed operation, fully static operation, standardized symmetrical output characteristics, quiescent current specified up to 20V, and 5V, 10V, and 15V parametric ratings. It has a low input leakage current and meets all requirements of JEDEC JESD13B standard specifications.