STMicroelectronics manuals, page 239
ST STEVAL-ISA051V2 handbook
This is a data brief about the STMicroelectronics PM6670AS-based evaluation board for DDR2/3 memory power supply controller. The board features a wide input voltage range of 4.5V to 36V, provides fixed output voltages of 0.9V (DDR2) or 1.5V (DDR3), adjustable output voltage range of 0.9V to 2.6V, and fast load transient response. It also includes features such as no current sensing, negative current limit, latched OVP, UVP, and thermal shutdown.
ST STP21N05L/STP21N05LFI handbook
STP21N05L STP21N05LFI N - CHANNEL ENHANCEMENT MODE LOW THRESHOLD POWER MOS TRANSISTOR is a 50V rated voltage, 21A rated current MOS tube produced by ST company. It has the characteristics of low RDS(on), low Qg, and logic level compatibility. It is suitable for high current, high frequency switching, relay drive and other applications.
ST STEVAL-ISA045V1 handbook
This is a data brief about the ST1S09 evaluation board. The evaluation board is a 2A / 1.2V high-efficiency synchronous buck converter designed for low-voltage applications, replacing high current linear solutions. It has an input voltage range of 2.7V to 5.5V, maximum output current of 2A, high internal switching frequency of 1.5MHz, short-circuit protection, and comes in a DFN6 3x3 package. The evaluation board uses current mode PWM topology and low ESR surface-mount ceramic capacitors to ensure low output ripple. The ST1S09 also has thermal protection and current limiting to prevent damage from accidental short-circuits.
ST STP210NF02/STB210NF02/STB210NF02-1 handbook
The STP210NF02 is a N-channel 20V - 0.0026 Ω - 120A D²PAK/I²PAK/TO-220 STripFET™ II POWER MOSFET with typical RDS(on) = 0.0026Ω, standard threshold drive and 100% avalanche tested. It is suitable for high current, high speed switching, solenoid and relay drivers, motor control, audio amplifiers, DC-DC & DC-AC converters.
ST STEVAL-ISA045V2 handbook
This is a 2A/3.3V high-efficiency synchronous buck converter evaluation board based on the ST1S09, with a 2.7V to 5.5V input voltage range, 3.3V output voltage, 2A maximum current, 1.5MHz high internal switching frequency, short-circuit protection, etc.
ST STEVAL-ISA046V1 handbook
STEVAL-ISA046V1 is an evaluation board for a high-efficiency synchronous buck converter based on ST1S09. It features an input voltage range of 2.7V to 5.5V, an output voltage of 1.2V, a maximum output current of 2A, a high internal switching frequency of 1.5MHz, an inhibit function, and short-circuit protection.
ST STEVAL-ISA046V2 handbook
This is a 2 A / 3.3 V high-efficiency synchronous buck converter evaluation board based on the ST1S09 with inhibit function
ST STP20NM60/STP20NM60FP/STW20NM60/STB20NM60/STB20NM60-1 handbook
The document describes the features and characteristics of the MDmesh™ MOSFET family, including low on-resistance, high dv/dt, and excellent avalanche capabilities.
ST STEVAL-ISA038V1 handbook
This document is a data brief for an evaluation board of a single-phase 5A step-down PWM controller by STMicroelectronics. The evaluation board is based on the L6728, a controller with integrated high-current drivers that provides complete control logic and protection for general DC-DC converters. The board demonstrates the operation of the device in a general-purpose low-current application. The input voltage range is 5V to 12V, the output voltage is fixed at 1.25V, and the output current can exceed 5A. The switching frequency is 300kHz.
ST STEVAL-CBP003V1 handbook
This is an evaluation board based on the STLED316S LED driver/controller and microcontroller ST7LITE39F2 as SPI master. The capabilities of ST's LED controller/driver STLED316S fit the market segment of front panel for HTiB (home theater in a box), Set top boxes, DVD readers and other similar applications that require a compact and integrated solution, keeping the total system cost as low as possible.
ST STP20NM50FD/STB20NM50FD-1 handbook
This document describes the STP20NM50FD and STB20NM50FD-1 N-channel power MOSFETs, which have low on-resistance, high dv/dt and avalanche capabilities, low input capacitance and gate charge, tight process control, and high manufacturing yields. It is recommended for use in bridge topologies, particularly ZVS phase-shift converters.
ST STB20NM50/STB20NM50-1/STP20NM50/STP20NM50FP handbook
STB20NM50-1 is a N-channel MOSFET device produced by ST company. It has a maximum voltage of 550V@Tjmax, a conduction resistance of 0.20Ω, a current of 20A and a TO220/FP-D²PAK-I²PAK package.
ST STP20NK50Z/STW20NK50Z handbook
STP20NK50Z - STW20NK50Z is a N-channel 500V - 0.23Ω - 20A TO-220/TO-247 Zener-Protected SuperMESH™Power MOSFET from ST company, which features typical RDS(on) = 0.23 Ω, extremely high dv/dt capability, 100% Avalanche tested, minimized gate charge, very low intrinsic capacitances and very good manufacturing repeatability.
ST STP20NE10 handbook
STP20NE10 is a N-channel 100V 0.07Ω 20A TO-220 package STripFET MOSFET produced by SGS-THOMSON. The product has typical RDS(on) = 0.07 Ω, exceptional dv/dt capability, 100% avalanche tested, and application-oriented characteristics descriptions.
ST STP20NE06L/STP20NE06LFP handbook
STP20NE06L is a N-channel MOSFET produced by STMicroelectronics. It has a rated voltage of 60V, a drain current of 20A, and a fast switching time. It is widely used in DC motor control, DC-DC/DC-AC converters, and synchronous rectification.
