TEXAS Manuals

The CY74FCT162827T and CY74FCT16827T are 20-bit buffers/line drivers that provide high-performance bus interface buffering for wide data/address paths or buses carrying parity. They have power-off disable outputs that allow for live insertion. They are ideally suited for driving high-capacitance loads and low-impedance backplanes.

SN54HC664, SN54HC665, SN74HC664, SN74HC665 are 8-bit bus transceivers with parity function produced by Texas Instruments

This document is the user manual of the SN74LVC16646 16-bit bus transceiver and register

The SN74LVCU04A is a hex inverter designed for 1.65-V to 3.6-V VCC operation. It contains six independent inverters with unbuffered outputs and performs the Boolean function Y = A. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

The PT4560 series is a single-output isolated DC/DC converter from TI, with a power rating of 30 watts and an output current of 8 A. The input voltage range is 36V to 75V, and the output voltage can be adjusted from 1.8 V to 15 V. This series features remote on/off control, under-voltage-lockout (UVLO), and a differential remote sense. It also includes output current limit, short-circuit protection, and over-temperature shutdown.

The PT78ST100 is a wide input range, 3-terminal regulator from TI that has a maximum output current of 1.5A and a variety of standard output voltages. It features excellent line and load regulation, internal short-circuit and over-temperature protection, and can be used in a variety of applications.

The SN54HC74 and SN74HC74 are dual D-type positive-edge-triggered flip-flops with clear and preset functions. They have a wide operating voltage range of 2V to 6V; the outputs can drive up to 10 LSTTL loads; the power consumption is low, with a maximum ICC of 40µA; the typical tpd is 15 ns; the output drive at 5V is ±4mA; and the input current is at least 1µA.

The TLE202x, TLE202xA, and TLE202xB are precision, high-speed, low-power operational amplifiers using a new Texas Instruments Excalibur process. These devices combine the best features of the OP21 with highly improved slew rate and unity-gain bandwidth. The complementary bipolar Excalibur process utilizes isolated vertical pnp transistors that yield dramatic improvement in unity-gain bandwidth and slew rate over similar devices. The addition of a bias circuit in conjunction with this process results in extremely stable parameters with both time and temperature. This means that a precision device remains a precision device even with changes in temperature and over years of use. This combination of excellent dc performance with a common-mode input voltage range that inclu

TMS29LF800T and TMS29LF800B are flash memory storage devices with 1048576 by 8-bit/524288 by 16-bit organization. They support 2.7V and 3.6V read/write operations and have multiple memory organization and architecture features. The products have single power supply, erasable, programmable, and low power dissipation characteristics.

SN54ALS74A, SN54AS74, SN74ALS74A, SN74AS74 are dual D-type positive-edge triggered flip-flops with clear and preset functions

This document describes the features and characteristics of the SN54HC11 and SN74HC11, which are triple 3-input positive-AND gates. They perform the Boolean function Y = A * B * C in positive logic.

This datasheet introduces the features and characteristics of SN65LVDS104 and SN65LVDS105. SN65LVDS104 and SN65LVDS105 are 4-port LVDS and 4-port TTL-TO-LVDS repeaters. This datasheet introduces the functions and characteristics of SN65LVDS104 and SN65LVDS105, including the receiver and drivers meet or exceed the requirements of ANSI EIA/TIA-644 standard, SN65LVDS105 receives low-voltage TTL (LVTTL) levels, SN65LVDS104 receives differential input levels, ±100 mV, designed for signaling rates up to 630 Mbps, operates from a single 3.3-V supply, low-voltage differential signaling, typical output voltage of 350 mV and a 100-Ω load, propagation delay time, SN65LVDS105 . . . 2.2 ns (Typ), SN65LVDS104 . . . 3.1 ns (Typ), electrically compatible with LVDS, PECL, LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL outputs with external networks, driver outputs are high impedance when disabled or with VCC <1.5 V, bus-pin ESD protection exceeds 16 kV, SOIC and TSSOP packaging

SN54AHCT04, SN74AHCT04 HEX INVERTERS are six independent inverters manufactured by Texas Instruments. They perform the Boolean function Y = A.

SN54AHCT123A and SN74AHCT123A are dual retriggerable monostable multivibrators with TTL-compatible inputs, Schmitt-trigger circuitry on the A, B, and CLR inputs for slow input transition rates, edge triggered from active-high or active-low gated logic inputs, retriggerable for very long output pulses, and overriding clear terminates output pulse.

This datasheet provides details about the characteristics and specifications of the SN54AHCT245 and SN74AHCT245 octal bus transceivers. Both devices are asynchronous, bidirectional data bus transceivers that can transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control input.