This page provides manuals, user guides, handbooks, instructions, specification, instruction, maintenance manual for TEXAS Motherboard, Data Converters, Wireless connection, Power Management, ...
The MSP430x31x is an ultralow-power mixed signal microcontroller family consisting of several devices that feature different sets of modules targeted to various applications.
The TPIC5223L is a monolithic gate-protected logic-level power DMOS array that consists of two electrically isolated independent N-channel enhancement-mode DMOS transistors.
SN74HC367N/D/DT/NSR/PW/PWR/PWT/J/W/FK is a 3-state output, high current driving capacity, low power buffer and line driver produced by Texas Instruments. Its operating voltage range is 2V~6V, the output current can reach ±6mA, and it can drive buses, buffer memory address registers, and drive 15 LSTTL loads.
TRS3237E is a multi-channel RS-232 1-MBit/s line driver/receiver from TI. It meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards, and has ESD protection, low power consumption and flexible interfaces
This document is the SCHS122I datasheet, which introduces the features and characteristics of the product, including wide voltage range, low on resistance, low crosstalk, fast switching speed and propagation speed, break-before-make switching, wide operating temperature range, high noise immunity, etc.
SN54AHC86, SN74AHC86 are quadruple 2-input exclusive-OR gates introduced by Texas Instruments. These devices operate in a range of 2-V to 5.5-V VCC, can withstand 250 mA current, and exceed JESD 22 ESD protection performance standards. These standards include 2000-V Human-Body Model (A114-A), 200-V Machine Model (A115-A), and 1000-V Charged-Device Model (C101).
The TPS2041A through TPS2044A and TPS2051A through TPS2054A power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. Each switch is controlled by an independent logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. These devices limit the output current to a safe level when the output load exceeds the current-limit threshold or a short is present.
The TPA3100D2 is a 20-W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. The TPA3100D2 can drive stereo speakers as low as 4Ω with a high efficiency of 92%, eliminating the need for an external heat sink. The gain of the amplifier is controlled by two gain select pins, with gain selections of 20, 26, 32, and 36 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts. It also features a clock output for synchronization with multiple Class-D devices.
The TPA3101D2 is a high-efficiency, 10-W stereo Class-D audio power amplifier from TI that can drive 4-ohm speakers. It features 87% efficiency, operates from 10-26V, and has four selectable, fixed gain settings: 20, 26, 32, and 36 dB. The amplifier also has thermal and short-circuit protection, and an auto-recovery feature.
The TPA3008D2 is a 10-W (per channel) efficient class-D audio amplifier for driving bridged-tied stereo speakers. The TPA3008D2 can drive stereo speakers as low as 8 Ω. The high efficiency of the TPA3008D2 eliminates the need for external heatsinks when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 15.3, 21.2, 27.2, and 31.8 dB. The outputs are fully protected against shorts to GND, VCC, and output-to-out
The TL284xB and TL384xB series of high-performance current-mode PWM controllers provide low start-up current, precise reference, automatic feed-forward compensation, high-current totem-pole output, undervoltage lockout and double-pulse suppression, and can implement off-line or dc-to-dc fixed-frequency current-mode control schemes with a minimum number of external components.
This document describes the features and characteristics of UC2842A/3A/4A/5A family of control ICs. This family is suitable for offline and DC to DC converters, and it has features such as low start up current, trimmed oscillator discharge current, automatic feed forward compensation, and pulse-by-pulse current limiting.
The TPA6211A1 is a 3.1W mono fully-differential audio power amplifier designed for wireless handsets, PDAs, and notebook computers. It features low power consumption, fast startup, low distortion, and wide voltage range.
The TAS5342 is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-ohm bridge-tied load (BTL) at up to 100W per channel with low harmonic distortion, low noise, and low idle current. It has a complete protection system to safeguard the device against a wide range of fault conditions. Supports multiple power output modes.
The UC3879 is a phase-shift resonant controller with programmable output turn-on delay that is compatible with voltage mode or current mode topologies and can operate at switching frequencies up to 300 kHz.
