TEXAS Manuals

CDC5801 is a low jitter clock multiplier and divider with programmable delay and phase alignment. It features a single-ended input and a differential output, supporting LVPECL, LVDS and LVTTL signal levels. CDC5801 operates in the frequency range of 19 MHz to 125 MHz, with an output frequency range of 150 MHz to 500 MHz. It has a 2.6 mUI programmable bidirectional delay step, with a typical phase jitter of 8.0-ps (12 kHz to 20 MHz) @ 500 MHz and a typical RMS period jitter of 2.1-ps (entire frequency band) @ 500 MHz. CDC5801 supports three power operating modes to minimize power consumption. It has a typical power consumption of 200 mW@500 MHz. CDC5801 is packaged in a Shrink Small-Outline Package (DBQ), with no external components required for PLL. It also has a Spread Spectrum Clock Tracking ability to reduce EMI. CDC5801 is suitable for use in video graphics, gaming products, data communications and telecommunications.

This document provides important information about the 2004 High Performance Analog/CDC User's Guide, including corrections, modifications, enhancements, improvements, and other changes to the products. It also includes TI's warranty for hardware products and the disclaimer regarding applications assistance and customer product design.

The LMV321, LMV358, and LMV324/LMV324S are single, dual, and quad low-voltage (2.7 V to 5.5 V), operational amplifiers with rail-to-rail output swing. The LMV324S is a variation of the standard LMV324 that includes a power-saving shutdown feature that reduces supply current to a maximum of 5 µA per channel when the amplifiers are not needed. The LMV321, LMV358, LMV324, and LMV324S are the most cost-effective solutions for applications where low-voltage operation, space saving, and low price are needed. These amplifiers were designed specifically for low-voltage (2.7 V to 5 V) operation, with performance specifications meeting or exceeding the venerable LM358 and LM324 devices that operate from 5 V to 30 V. Additional features of the LMV3xx devices are a common-mode input voltage range that includes ground, 1-MHz unity-gain bandwidth, and 1-V/µs slew rate. The LMV321 is available in the ultra-small D

The PGA2500 is a digitally controlled, analog microphone preamplifier designed for use as a front end for high-performance audio analog-to-digital converters (ADCs). The PGA2500 features include low noise, wide dynamic range, and a differential signal path.

The INA166 is a low-noise, low-distortion, G = 2000 instrumentation amplifier. It has a wide bandwidth and excellent dynamic response, making it ideal for amplifying low-level signals such as microphones or hydrophones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth.

INA217 is a low-noise, low-distortion, monolithic instrumentation amplifier. Current-feedback circuitry allows INA217 to achieve wide bandwidth and excellent dynamic response over a wide range of gain. INA217 is ideal for low-level audio signals such as balanced low-impedance microphones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide band- width. Unique distortion cancellation circuitry reduces distortion to extremely low levels, even in high gain. INA217 provides near-theoretical noise performance for 200Ω source imped- ance. INA217 features differential input, low noise, and low distortion that provides superior performance in profes- sional microphone amplifier applications. INA217 features wide supply voltage, excellent output voltage swing, and high output current drive, making it an optimal candidate for use in high-level audio stages. INA217 is available in the same DIP-8 and SOL-16 wide body packages and pinouts as the SSM2017. For a smaller package, see the INA163 in SO-14 narrow. INA217 is specified over the temperature range of –40°C to +85°C.

INA103 is a low noise, low distortion monolithic instrumentation amplifier from AD. It achieves very wide bandwidth and excellent dynamic response.

DRV601 is a stereo line driver produced by TI. Its feature is that the gain can be set by external resistors and supports a gain range of -1V/V to -10V/V.

The DRV603PW is a 3-VRMS pop-free stereo line driver designed to allow the removal of the output dc-blocking capacitors for reduced component count and cost. The device is ideal for single-supply electronics where size and cost are critical design parameters.

The TPS5100 is a triple PWM control circuit, primarily designed to compose the power supply for LCD display. Each PWM channel has its own error amplifier, PWM comparator, dead-time control, and output driver. The trimmed voltage reference, oscillator, undervoltage lockout, and short circuit protection are common for all channels. This device includes two boost exclusive circuits (ch1,3) and a buck-boost exclusive circuit (ch2). The operating frequency is set with an external resistor and capacitor, and dead time is continuously adjustable from 0% to 100% duty cycle with a resistive divider network. Soft start function can be implemented by adding a capacitor to the dead time divider network. Two dead time control inputs are assigned for ch1,3 pair and ch2 individually, and each dead time control input can be used to control on/off operation. TPS5100 can operate from a 2.5V supply voltage, and ch1,3 pair and ch2 operate with reverse phase switching.

The SN65HVD1040 is a low-power CAN transceiver with bus wake-up capability. It is suitable for battery operated applications and serves as an improved drop-in replacement for the TJA1040. The product features ±12 kV ESD protection, low-current standby mode, bus-fault protection, and is compatible with various data bus interfaces such as SAE J1939, NMEA 2000, and ISO 11783. It is ideal for applications in hand-held diagnostics, medical scanning and imaging, HVAC, security systems, telecom base station status and control, and industrial automation.

This letter is attached to the DRV603EVM DirectPathTM evaluation module (EVM) package. It provides information about the materials included in the EVM package and reminds users to read the user guide and important notices before setup and use. The evaluation module features the DRV603 chip and is designed for high-end performance amplifiers and audio systems.

SBOS218A is a high-performance stereo audio volume control designed for professional and high-end consumer audio systems. It features digitally-controlled analog volume control, wide gain and attenuation range, low noise and distortion, zero crossing detection, and mute function.

The PGA2320 is a high-performance, stereo audio volume control designed for professional and high-end consumer audio systems. The ability to operate from ±15V analog power supplies enables the PGA2320 to process input signals with large voltage swings, thereby preserving the dynamic range available in the overall signal path. Using high performance operational amplifier stages internal to the PGA2320 yields low noise and distortion, while providing the capability to drive 600Ω loads directly without buffering. The three-wire serial control interface allows for connection to a wide variety of host controllers, in addition to support for daisy-chaining of multiple PGA2320 devices.

The INA137 and INA2137 are differential line receivers consisting of high performance op amps with on-chip precision resistors. They are fully specified for high performance audio applications and have excellent ac specifications, including low distortion (0.0005% at 1kHz) and high slew rate (14V/µs), assuring good dynamic response. In addition, wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. The dual version features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded. The INA137 and INA2137 on-chip resistors are laser trimmed for accurate gain and optimum common-mode rejection. Furthermore, excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. Operation is guaranteed from ±4V to ±18V (8V to 36V total supply). The INA137 is available in 8-pin DIP and SO-8 surface-mount packages. The INA2137 comes in 14-pin DIP and SO-14 surface-mount packages. Both are specified for operation over the extended industrial temperature range, –40°C to +85°C.