TEXAS Manuals

SN74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible FET multiplexer/demultiplexer.

SN54AHCT32, SN74AHCT32 are quad 2-input positive-OR gates from Texas Instruments. They have TTL-voltage compatibility, 250mA latch-up performance, and 2000V Human-Body Model (A114-A) and 200V Machine Model (A115-A) ESD protection.

THS4011/12 290-MHz Low Distortion High-Speed Amplifiers are ideal high performance single/dual channel voltage feedback amplifiers for a wide range of applications.

The THS4211 is a low distortion, high speed, voltage feedback amplifier from TI that features unity gain stability, wide bandwidth (1GHz), high slew rate (970 V/μs), low distortion (-90 dBc THD @ 30 MHz) and high output drive (IO = 200 mA).

tl322c, tl322i low-power operational amplifiers datasheet

TLC2652, TLC2652A, TLC2652Y Advanced LinCMOS PRECISION CHOPPER-STABILIZED OPERATIONAL AMPLIFIERS

TLV2352 consists of two independent, low-power comparators specifically designed for single power-supply applications and operates with power-supply rails as low as 2V. When powered from a 3V supply, the typical supply current is only 120µA. TLV2352 is designed using the Texas Instruments LinCMOS technology and therefore features an extremely high input impedance (typically greater than 1012Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and they can be connected to achieve positive-logic wired-AND relationships.

This document is the datasheet of the TMS320C80 digital signal processor from 1997, which describes the features and characteristics of the processor. The processor is a single-chip parallel multiple instruction/multiple data (MIMD) DSP capable of executing over two billion RISC-equivalent operations per second. It includes a master processor (MP), four parallel processors (PP), a transfer controller (TC), and a video controller (VC) among other components. It features a 32-bit RISC processor, IEEE-754 floating-point capability, instruction cache, data cache, and more. It also supports big-endian or little-endian operation, has 50K bytes of on-chip RAM, a 4G-byte address space, a 16.6-ns cycle time, and operates at 3.3V.

The TPS2223A, TPS2224A, and TPS2226A CardBus™ power-interface switches provide an integrated power-management solution for two PC Card sockets. The TPS2220A is a single-slot option for this family of devices. These devices allow the controlled distribution of 3.3 V, 5 V, and 12 V to each card slot. The current-limiting and thermal-protection features eliminate the possibility of card failure due to overcurrent or overheating.

This file is the application guide for TPS2398/TPS2399, introducing the main features and application scenarios of the product

The document introduces TPS54073, a low-input voltage, high-output current synchronous buck PWM converter. It features 8-mΩ MOSFET switches for high efficiency operation. The converter integrates all required active components, including a true high-performance voltage error amplifier, undervoltage-lockout circuit, internally/externally set slow-start circuit, and power good output.

The TPS6030x is a high-efficiency charge pump that converts a single-cell voltage to 3.0V/3.3V. It features a regulated 3V or 3.3V output voltage with up to 20mA output current. It is optimized for 1.2V battery voltage and achieves up to 90% power conversion efficiency. The product does not require an inductor and only needs five small 1uF ceramic capacitors to build a complete high-efficiency DC/DC charge pump converter.

This document introduces the TPS755xx family of 5A low dropout regulators, which includes four fixed voltage option regulators with integrated power-good (PG) and an adjustable voltage option regulator. These devices are capable of supplying 5A of output current with a dropout of 250mV (TPS75533). Therefore, the device is capable of performing a 3.3V to 2.5V conversion. At full load, quiescent current is 125µA and drops down to less than 1µA when the device is disabled. The TPS755xx is designed to have fast transient response for large load current changes.

This document describes the features and characteristics of the TPS775xx and TPS776xx series products, including fast transient response, 500mA low-dropout voltage regulator, adjustable and fixed output versions, etc.

The UC1842/3/4/5 family is a current mode PWM controller optimized for off-line and DC to DC converters. It features low start-up current, automatic feed forward compensation, pulse-by-pulse current limiting, enhanced load response characteristics, etc.