TEXAS Manuals

TLV5610, TLV5608, and TLV5629 are pin-compatible, eight-channel, 12-/10-/8-bit voltage output DACs each with a flexible serial interface. The serial interface allows glueless interface to TMS320 and SPI, QSPI, and Microwire serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits. Additional features are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs, and a data output which can be used to cascade multiple devices.

The TPS2838/39/48/49 series are MOSFET drivers designed for high-performance synchronous power supplies. They can provide up to 4A peak current and are ideal for use with power supply controllers that do not have on-chip drivers.

The TPS382x family of supervisors provides circuit initialization and timing supervision, primarily for DSP and processor-based systems.

The TPS715xx is a low dropout linear regulator from TI that provides 50mA of output current, 24V of maximum input voltage, and low as 3.2µA of quiescent current. It can operate in an input voltage range of 2.5V-24V and is stable with any capacitor (≥ 0.47µF). It is suitable for various low-power applications such as microcontrollers, mobile phones, and portable devices.

The TPS799xx is a low-dropout linear regulator from TI with low quiescent current, ultra-low noise, and high PSRR.

TLE202x, TLE202xA, TLE202xB, TLE202xY are the new generation of precision, high-speed, low-power operational amplifiers using the Texas Instruments Excalibur process.

The TLV247x series are low power, high performance, CMOS operational amplifiers that offer 2.8 MHz of gain-bandwidth product, input bias current of only 2.5 pA, and output drive capability up to ±35 mA.

TMS320C6211 and TMS320C6211B are excellent price/performance digital signal processors (DSPs) with eight 32-bit instructions per cycle, clock rates of 150MHz and 167MHz, instruction cycle times of 6.7ns and 6ns, and performance of 1200 and 1333 MIPS.

The MC1458 and MC1558 are dual general-purpose operational amplifiers, with each half electrically similar to the µA741, except that offset null capability is not provided. The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. The MC1458 is characterized for operation from 0°C to 70°C. The MC1558 is characterized for operation over the full military temperature range of –55°C to 125°C.

SLAS344A is a low-power microcontroller with a low supply voltage range of 1.8V to 3.6V. It features five power saving modes and fast wake-up from standby mode. It adopts a 16-bit RISC architecture and includes a 12-bit A/D converter, 16-bit timers, a comparator, and a serial communication interface. It also has an integrated LCD driver and is suitable for various applications.

This document is the datasheet of SN54ALS04B, SN54AS04, SN74ALS04B, SN74AS04 HEX INVERTERS, which contains 6 independent HEX INVERTERS and can work in the temperature range of -55°C to 125°C

This document describes the features and characteristics of models such as SN54LVTH18512, SN54LVTH182512, SN74LVTH18512, and SN74LVTH182512. These products are 3.3V ABT SCAN test devices with 18-bit universal bus transceivers. They support mixed-mode signal operation, compatible with 5V input and output voltages with 3.3V VCC. They can operate with unregulated battery down to 2.7V. The UBT (Universal Bus Transceiver) combines D-type latches and D-type flip-flops for operation in transparent, latched, or clocked mode. Bus hold on data inputs eliminates the need for external pullup/pulldown resistors. The B-port outputs of 'LVTH182512 devices have equivalent 25-Ω series resistors, so no external resistors are required. They are compatible with the IEEE Std 1149.1-1990 (JTAG) test access port and boundary-scan architecture. The SCOPE instruction set includes the required instructions and optional CLAMP and HIGHZ, supporting parallel-signature analysis at inputs, pseudo-random pattern generation from outputs, sample inputs/toggle outputs, binary count from outputs, device identification, and even-parity opcodes. Package options include 64-pin plastic thin shrink small outline (DGG) and 64-pin ceramic dual flat (HKC) packages using 0.5-mm center-to-center spacings.

Query suppliers for TPC1010AFN-044C. This document provides information about the TPC1010AFN-044C product.