Analog Devices Manuals

AD574A is a 12-bit single-ended voltage input analog-to-digital converter with 12-bit resolution, 5V power supply voltage and 5V internal reference voltage. It can accept ±5V analog input signals.

This application note describes the different steps to calibrate a 3-phase 4-wire, 3-element energy meter based on the ADE7754.

AD10201 is a 12-bit 105MSPS analog-to-digital converter with dual-channel, high isolation, low power consumption, gain flatness, low input distortion and other features.

This document describes a complete monolithic 12-bit, 10 MSPS A/D converter with a high-performance track-and-hold amplifier (THA) and voltage reference from Analog Devices. The document provides detailed technical specifications and complete product part numbers.

ADV7189B Rev. B is a multi-format SDTV video decoder produced by Analog Devices. It supports NTSC-(J, M, 4.43), PAL-(B/D/G/H/I/M/N), SECAM format video input. It integrates three 54 MHz, Noise Shaped Video®, 12-bit ADCs, which are driven by a single 28 MHz crystal clock. It has Line-locked clock-compatible (LLC), Adaptive-Digital-Line-Length-Tracking (ADLLT™), signal processing, FIFO management, 5-line adaptive comb filters, Subcarrier frequency lock and status information output, Integrated AGC with adaptive peak white mode, Macrovision® copy protection detection, CTI (chroma transient improvement), DNR (digital noise reduction) and other functions.

AD7884/AD7885 is a LC2MOS 16-bit high-speed sampling ADC with features such as fast conversion, high throughput rate, and low power consumption. It is suitable for applications in automatic test equipment, medical instrumentation, industrial control, data acquisition systems, and robotics.

ADT7518 is a temperature sensor, 4-channel ADC, and quad voltage output DAC with SPI/I2C compatible interface. It features four 8-bit DACs with buffered voltage output, guaranteed monotonicity over all codes. It also has a 10-bit temperature-to-digital converter and a 10-bit 4-channel ADC. The input range is 0V to 2.25V and the temperature range is -40°C to +120°C with a temperature sensor accuracy of ±0.5°C. The supply range is 2.7V to 5.5V and the DAC output range is 0V to 2VREF. It has a power-down current of 1µA. The ADT7518 has a SPI, I2C, QSPI, MICROWIRE, and DSP compatible 4-wire serial interface, as well as SMBus packet error checking (PEC) compatibility. It is suitable for portable battery-powered instruments.

AD7998/AD7997 Errata Sheet introduces that pin-out diagram of AD7998/AD7997 ADCs has changed. Please discard any pin-out information from AD7998/AD7997 data sheets up to and including Rev PrD.

ADE7751 is an energy metering IC with on-chip fault detection from Analog Devices. It can be used in two-wire distribution systems to detect two-wire current faults.

This document describes the features and characteristics of the AD9219 Quad, 10-Bit, 40/65 MSPS Serial LVDS 1.8 V ADC, including 4 ADCs integrated into 1 package, low power, excellent linearity, programmable clock and data alignment, etc.

This application note describes a high accuracy, low cost, single-phase power meter based on the ADE7757

This application note explains how to interface AD7676 ADCs in master serial mode to ADSP-21365 SHARC® processors. It also provides example code to demonstrate how the ADSP-21365 processor's Serial Port (SPORT) can be programmed to receive data from the AD7676 converter when the AD7676 is configured in master serial mode.

This application note explains how to interface AD7276 high-speed data converters to ADSP- 21262 SHARC® processors. This application note also provides example code to demonstrate how the SHARC processor's serial ports (SPI and SPORTs) can be programmed to receive data from AD7276 devices in core and DMA modes.