Analog Devices Manuals

The OPx13 family of single-supply operational amplifiers features both low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and noise. Optimized for these parameters, the OPx13 family can be used to take advantage of superior analog performance combined with digital correction.

The AD826 is a high-speed, low-power dual operational amplifier with high output current drive capability and low power supply current. It is ideal for power sensitive applications such as video cameras and portable instrumentation, and can operate from a single +5V supply.

The AD822 is a single-supply, rail-to-rail, low power FET-input op amp from Analog Devices. It features high load drive, excellent AC performance, low power, good DC performance and low noise. It is suitable for battery-powered precision instrumentation, photodiode preamps, active filters, 12-bit to 14-bit data acquisition systems, medical instrumentation and low power references and regulators.

The AD828 is a low-cost, dual video op amp optimized for use in video applications that require gains of +2 or greater and high output drive capability, such as cable driving.

OP292/OP492 are dual/quad single-supply operational amplifiers with features including single-supply operation, input common-mode includes ground, output swings to ground, high slew rate, high gain bandwidth, low input offset voltage, high open-loop gain, and no phase inversion.

The OP183 is a single-supply, 5 MHz bandwidth amplifier with slew rates of 10 V/μs. It can operate from voltages as low as 3 V and up to 36 V. This combination of slew rate and bandwidth yields excellent single-supply ac performance, making this amplifier ideally suited for telecom and multimedia audio applications. The OP183 also provides good dc performance with guaranteed 1 mV offset. Noise is a respectable 10 nV/√Hz. Supply current is only 1.2 mA per amplifier. This amplifier is ideal for a wide range of audio applications.

The AD812 is a low power, single supply, dual video amplifier. Each of the amplifiers have 50 mA of output current and are optimized for driving one back-terminated video load (150 Ω) each. Each amplifier is a current feedback amplifier.

AD8001 is a high-performance, low-power, high-speed, high-precision, high output drive capability of Analog Devices audio / video amplifier. With a 150Ω load condition, AD8001 has 0.1dB gain flatness, 0.01% gain error and 0.025° phase error. AD8001 operates in the frequency range of 800MHz, with a –3dB bandwidth of 880MHz (gain = +1), and 440MHz (gain = +2). The maximum output current is 70mA and can drive 4 75Ω loads.

AD9631/AD9632 are ultralow distortion, wide bandwidth voltage feedback op amps. They feature wide bandwidth, ultralow distortion, low noise, high-speed slew rate, and fast settling.

OP179/OP279 is a high output current operational amplifier launched by TI, which has the characteristics of single power supply, low distortion, wide common-mode range and high output current. It is suitable for applications such as level conversion, driving headphones, display screens, transformers and power transistors

The OP191/OP291/OP491 series are single-supply, rail-to-rail input/output op amps with wide supply voltage ranges and low power consumption.

The AD824 is a low voltage single supply amplifier from Analog Devices with ultra low input current and rail-to-rail output. It is suitable for a wide range of low voltage applications.

The AD8047/AD8048 are 250 MHz general purpose voltage feedback op amps whose low distortion and cap load drive make them ideal for buffering high speed ADCs. They are suitable for 12-bit/10 MSPS or 8-bit/60 MSPS ADCs. Additionally, the balanced high impedance inputs of the voltage feedback architecture allow maximum flexibility when designing active filters. The AD8047 and AD8048 are offered in industrial (–40°C to +85°C) temperature ranges and are available in 8-lead PDIP and SOIC packages.

The OP193/OP293 are micropower operational amplifiers that feature high precision, low supply current, and the ability to operate at low voltages. They offer high performance in single-supply systems, with input and output ranges including ground, and outputs swinging from the negative rail to within 600 mV of the positive supply. For low voltage operation, the OP193/OP293 can operate from +1.7 V to ±18 V.

The document describes the features and characteristics of the AD8011 300 MHz current feedback amplifier by Analog Devices. The amplifier is easy to use and has low power consumption, making it suitable for power-sensitive high-speed systems. It offers high speed and fast settling, with a bandwidth of 300 MHz and a slew rate of 2000 V/μs. The amplifier has good video specifications, low distortion, and low differential gain error.