Analog Devices Manuals

The ADV3202/ADV3203 are 300MHz, 32×16 buffered analog crosspoint switches

ADV3200/ADV3201 32 × 32 Buffered Analog Crosspoint Switch is a switch array chip produced by Analog Devices, supporting single 5V, dual ±2.5V, dual ±3.3V power supply, with 60MHz, 0.1dB gain flatness, 0.1% differential gain error (RL = 150 Ω), 0.1° differential phase error (RL = 150 Ω), >300MHz bandwidth, >400V/μs slew rate, 1.25W power consumption, and -48dB @ 5MHz suppression ratio

ADV3226/ADV3227 is a 16×16 high performance switch array, which is pin compatible with AD8114/AD8115, providing a complete solution with buffered inputs and programmable high impedance outputs. It can drive 150Ω loads, operate on ±5V supplies, with low power consumption of 1.3W.

This document describes the features and characteristics of the 750 MHz, 8 × 8 analog crosspoint switch ADV3228/ADV3229. The switch is high speed and nonblocking, with a 16 × 8 array. It has buffered inputs and programmable high impedance outputs. Additionally, the switch has low power consumption and excellent AC performance.

ADV3224/ADV3225 is an 16 x 8 analog crosspoint switch produced by Analog Devices. It has the characteristics of high speed, non-blocking switch array, programmable high impedance output, etc., and is applied to fields such as video, compressed video, and three-level digital video.

ADV3205 is a 16 × 16 high speed nonblocking switch array, which has serial or parallel programming of switch array, serial data out allows daisy-chaining control of multiple 16 × 16 devices to create larger switch arrays, complete solution, buffered inputs, 16 output amplifiers, operates on ±5 V supplies, supply current of 50 mA, excellent video performance, VS = ±5 V -3 dB bandwidth: 60 MHz 0.1 dB gain flatness: 10 MHz 0.1% differential gain error (RL = 1 kΩ) 0.1° differential phase error (RL = 1 kΩ) low all hostile crosstalk: −67 dB at 5 MHz output disable allows connection of multiple devices without loading the output bus RESET pin allows disabling of all outputs power-on reset capability with capacitor to ground 100-lead LQFP (14 mm × 14 mm) applications: CCTV surveillance, industrial automation, security, automotive, medical equipment, etc.

VisualDSP++ is an integrated development environment for Analog Devices' Blackfin, SHARC, and TigerSHARC processors. It supports C/C++ programming and includes a rich library of signal processing routines to accelerate development

The AD8335 is a low-noise, low-cost quad variable gain amplifier that can be used in medical imaging, sonar, and test and measurement applications. It features a low-noise preamplifier, differential output, and wideband gain control.

ADE7762 is a polyphase energy metering IC with phase drop indication. It supports high accuracy metering at 50Hz/60Hz with less than 0.1% error over a dynamic range of 500:1. The IC is compatible with 3-phase, 3-wire delta and 3-phase, 4-wire Wye configurations and provides average active power outputs and high frequency outputs for calibration. It also features phase sequence error detection, dropout indication for each phase, and on-chip power supply monitoring.

This document introduces the features and characteristics of the 8-bit high-speed multiplying D/A converter DAC08.

ADE7752B is a 3-phase, 3-wire, and 4-wire energy metering IC with pulse output. It features high accuracy, supports 50Hz/60Hz frequency, and is compatible with various configurations. It provides average active power and instantaneous active power outputs. The IC also has reverse wiring and negative power detection, and is suitable for driving electromechanical counters and 2-phase stepper motors.

The AD561 is an integrated circuit 10-bit digital-to-analog converter combined with a high stability voltage reference fabricated on a single monolithic chip.

AD8384 is a 10-bit, 6-channel decimating LCD driver with high accuracy, high resolution voltage outputs. It features laser trimmed outputs, fast settling, high voltage drive, high update rates, and flexible logic, among other characteristics.

The ADuM1233 is a precision half-bridge driver from Analog Devices that uses the Analog Devices iCoupler® technology to provide independent and isolated high-side and low-side outputs. The device provides 0.1A peak output current and can operate at a maximum frequency of 5MHz. The ADuM1233 is widely used in isolated IGBT/MOSFET gate drives, plasma displays, industrial inverters, and switching power supplies.

The OP37 is a low noise, high precision, high speed operational amplifier with gains greater than 5. Features include low noise, low drift, high speed, low input offset voltage, excellent CMRR, high open-loop gain.