Analog Devices Manuals

ADP1612/ADP1613 are 650 kHz /1.3 MHz Step-Up PWM DC-to-DC Switching Converters with features such as current limit, adjustable output voltage, adjustable soft start, etc. They are suitable for TFT LCD bias supplies, portable applications, and industrial/instrumentation equipment.

The AD825 is a low cost, general-purpose high speed JFET amplifier from Analog Devices. The AD825 features a high speed of 41 MHz, -3 dB bandwidth, 125 V/µs slew rate, and 80 ns settling time. The device has a 20 pA input bias current and 10 fA/√Hz noise current, as well as 12 nV/√Hz input voltage noise. The AD825 operates with ±5 V to ±15 V fully specified power supplies, and has a low distortion of -76 dB at 1 MHz. The device also has high output drive capability, can drive unlimited capacitance loads, and has an output current of 50 mA. The AD825 is available in an 8-lead SOIC package.

AD8051/AD8052/AD8054 are low-cost, high-speed, single-supply amplifiers with 110 MHz and 150 MHz -3 dB bandwidths, low distortion, and outstanding load drive capability

AD8012* is a dual 350 MHz low power amplifier with features such as low power consumption, high output current, high speed, and low distortion. It is widely used in applications such as XDSL and HDSL line drivers, ADC buffers, professional cameras, CCD imaging systems, ultrasound equipment, and digital cameras.

The AD8010 is a low power, high current amplifier capable of delivering a minimum load drive of 175 mA. Signal performance such as 0.02% and 0.03° differential gain and phase error is maintained while driving eight 75 Ω back terminated video lines. The current feedback amplifier features gain flatness to 60 MHz and –3 dB (G = +1) signal bandwidth of 230 MHz and only requires a typical of 15.5 mA supply current from ±5 V supplies. These features make the AD8010 an ideal component for Video Distribution Amplifiers.

AD8057/AD8058 is a low-cost, single- and dual-channel, high-performance voltage feedback amplifier with a 325 MHz bandwidth, 1000 V/μs slew rate, 0.1 dB gain flatness, 7 nV/√Hz noise, 5.4 mA/amplifier typical supply current @ 5 V, −85 dBc @ 5 MHz distortion, 3 V to 12 V wide supply range, and SOT-23 and SOIC packages.

The AD8541/AD8542/AD8544 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. They are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwidth at a low current consumption of 45 μA per amplifier.

The AD8017 is a low cost, dual high speed amplifier capable of driving low distortion signals to within 1.0 V of the supply rail. It is intended for use in single supply xDSL systems where low distortion and low cost are essential. The amplifiers will be able to drive a minimum of 200 mA of output current.

The AD8014 is a low power, high performance 400 MHz amplifier. It features low cost, high speed, low noise, low distortion, and is suitable for applications such as photo-diode preamps, cameras, handheld devices, etc.

The AD8591/AD8592/AD8594 are single-supply, rail-to-rail input/output operational amplifiers with shutdown.

The AD8016 is a low power, high output current xDSL line driver that features full ADSL central office (CO) performance on ±12 V supplies.

AD8614/AD8644 are single and quad 18 V operational amplifiers with a unity-gain bandwidth of 5.5 MHz, low voltage offset of 1.0 mV, slew rate of 7.5 V/μs, single-supply operation from 5V to 18V, high output current of 70 mA, low supply current of 800 μA/amplifier, stability with large capacitive loads, and rail-to-rail inputs and outputs.

This document describes the features and characteristics of AD8571/AD8572/AD8574 amplifiers, including low offset voltage, low input offset drift, rail-to-rail input and output swing, single-supply operation, high gain, high common mode rejection ratio, high power supply rejection ratio, ultra-low input bias current, low supply current, 50 us overload recovery time and no external capacitors.

This document describes the features and characteristics of the AD8551/AD8552/AD8554 series of ultra-low drift, single-supply, rail-to-rail input/output operational amplifiers. These features include low offset voltage, drift, input/output swing, single-supply operation, high gain, CMRR, PSRR, ultra-low input bias current, and low supply current. They are suitable for applications such as temperature sensors, pressure sensors, precision current sensing, strain gage amplifiers, medical instrumentation, and thermocouple amplifiers.